Search results
Results from the WOW.Com Content Network
The High Value engine family from General Motors is a group of cam-in-block or overhead valve V6 engines.These engines feature cast iron blocks and aluminum heads, and use the same 60° vee bank as the 60° V6 family they are based on, but the new 99 mm (3.90 in) bore required offsetting the bores by 1.5 mm (0.059 in) away from the engine center line.
Another difference with the 3.5 as opposed to the 3.3 is that it has a timing belt, not a timing chain. The water pump is driven by the timing belt on the 3.5, whereas on the 3.3, the accessory belt drives it. At its debut in 1993, this engine produced 214 hp (160 kW) and 221 lb⋅ft (300 N⋅m) with an iron block and aluminium cylinder heads.
The 3.5 L's highest output to date is 290 bhp (216 kW; 294 PS). This version was used in the redesigned 2011 Ford Explorer. The engine is assembled at Lima Engine in Lima, Ohio, with expansion planned in Cleveland Engine Plant #1. The 3.5 L was on the Ward's 10 Best Engines list for 2007. The 3.5 L Duratec 35 installed in a 2007 Lincoln MKZ
Three variants of the naturally aspirated M276 DE 35 engine were produced in 2010–2017 with a displacement of 3.5 L (3,498 cc), bore and stroke of 92.9 mm × 86 mm (3.66 in × 3.39 in). Output of the first variant introduced on 2011 C350 BlueEfficiency with 12.2:1 compression ratio is 215 kW (292 PS; 288 hp) at 6400 rpm with 365 N⋅m (269 lb ...
A 3.5-litre Rover V8 engine, stripped of ancillaries, cylinder heads and sump 3.5-litre Rover V8 engine in a 1973 Range Rover. The initial Rover version of the engine had a displacement of 3.5 L; 215.3 cu in (3,528 cc). [5] [6] The bore and the stroke was 88.9 mm × 71.12 mm (3.50 in × 2.80 in). All Rover V8s were OHV pushrod engines with two ...
The 3.5 L (3,470 cc) Lambda II MPi G6DC Lambda II version debuted in the global version of the 2011 Kia Sorento. This engine comes with and is rated at 280–290 PS (206–213 kW; 276–286 hp) at 6,300-6,600 rpm and 34.3 kg⋅m (336 N⋅m; 248 lb⋅ft) at 5,000 rpm depending on application.
Output was 200 hp (149 kW) at 6200 rpm and 24.5 kg⋅m (240 N⋅m; 177 lb⋅ft) of torque at 4600 rpm. It had a variable intake manifold to optimize torque output across varying engine speeds and engine response.
The engine did however have a second brief lease of life in sportscar racing, when the FIA announced plans to transition towards using 3.5 L F1-style engines in Group C in the early 1990s. In 1990 Spice Engineering adapted its existing Group C design to take a 3.5L DFZ instead of the previously used 3.3 L DFL engine.