Search results
Results from the WOW.Com Content Network
Penetrating sealers often require the use of special cleaners which both clean and top up the repellent ingredient left on the stone surface. These sealers are often breathable to a certain degree, but do not penetrate deeply enough (generally less than 1mm) to be effective against salt attack, such as efflorescence and spalling.
Grout is generally a mixture of water, cement, and sand, and it frequently gets employed in efforts such as pressure grouting, embedding rebar in masonry walls, connecting sections of precast concrete, filling voids, and sealing joints such as those between tiles. Common uses for grout in the household include filling in tiles of shower floors ...
In the 17th century glazing putty was first used to seal window glass made with linseed oil and chalk, later other drying oils were also used to make oil-based putties. [4] In the 1920s, polymers such as acrylic polymers, butyl polymers and silicone polymers were first developed and used in sealants. By the 1960s, synthetic-polymer-based ...
Concrete sealers are applied to concrete to protect it from surface damage, corrosion, and staining. They either block the pores in the concrete to reduce absorption of water and salts or form an impermeable layer which prevents such materials from passing.
Decomposed granite is a kind of granite rock that is weathered to the point that the parent material readily fractures into smaller pieces of weaker rock. Further weathering yields material that easily crumbles into mixtures of gravel -sized particles known as grus that further may break down to produce a mixture of clay and silica sand or silt ...
Vitrified tile is a ceramic tile with very low porosity. [1] It is an alternative to marble and granite flooring. Vitrified tiles are often used outdoors due to their water and frost resistance. There are four types of Vitrified tiles - Soluble salt, Double charge, Full Body, and Glazed.
A tile mosaic is a digital image made up of individual tiles, arranged in a non-overlapping fashion, e.g. to make a static image on a shower room or bathing pool floor, by breaking the image down into square pixels formed from ceramic tiles (a typical size is 1 in × 1 in (25 mm × 25 mm), as for example, on the floor of the University of ...
In color theory, a tint is a mixture of a color with white, which increases lightness, while a shade is a mixture with black, which increases darkness. Both processes affect the resulting color mixture's relative saturation. A tone is produced either by mixing a color with gray, or by both tinting and shading. [1]