Search results
Results from the WOW.Com Content Network
Repeater frequency sets are known as "repeater pairs", and in the ham radio community most follow ad hoc standards for the difference between the two frequencies, commonly called the offset. In the USA two-meter band, the standard offset is 600 kHz (0.6 MHz), but sometimes unusual offsets, referred to as oddball splits, are used. The actual ...
The 2-meter amateur radio band is a portion of the VHF radio spectrum that comprises frequencies stretching from 144 MHz to 148 MHz [1] in International Telecommunication Union region (ITU) Regions 2 (North and South America plus Hawaii) and 3 (Asia and Oceania) [2] [3] and from 144 MHz to 146 MHz in ITU Region 1 (Europe, Africa, and Russia).
Morse code is called the original digital mode. Radio telegraphy, designed for machine-to-machine communication is the direct on / off keying of a continuous wave carrier by Morse code symbols, often called amplitude-shift keying or ASK, may be considered to be an amplitude modulated mode of communications, and is rightfully considered the first digital data mode.
The 2 200 metre band is available for use in several countries, and the 2007 World Radiocommunication Conference (WRC-07) recommended it as a worldwide amateur allocation. Before the introduction of the 2 200 metre band in the U.K. in 1998, operation on the even lower frequency of 73 kHz, in the LF time signal band, was allowed from 1996–2003.
Repeater use sparked a huge interest in the 2-meter and 70-centimeter (420–450 MHz) bands; however, this interest never fully found its way into the 1.25-meter band. Many amateurs attribute this to the abundance of commercial radio equipment designed for 136–174 MHz and 450–512 MHz that amateurs could easily modify for use on the 2-meter ...
Same band repeaters operate with input and output frequencies in the same frequency band. For example, in US two-way radio, 30–50 MHz is one band and 150–174 MHz is another. A repeater with an input of 33.980 MHz and an output of 46.140 MHz is a same band repeater.
American radio amateurs may use a maximum of one watt of radiated RF power, on any ham frequency authorized for data emissions, to control RC models. [10] Canadian radio amateurs may use any amateur frequency above 30 MHz for the control of RC models. [11] Plus or minus 5 MHz is a common repeater frequency offset in the 70 cm band.
As an "all-band" transceiver, the TS-2000 offers a maximum power output of 100 watts on the HF, 6 meters, and 2 meters bands, 50 watts on 70 centimeters, and, with the TS-2000X or the optional UT-20, 10 watts on the 1.2 GHz or 23 centimeters band. The (American version) radio's main receiver covers 30 kHz through 60 MHz, 142 MHz through 152 MHz ...