Search results
Results from the WOW.Com Content Network
Unwanted gas is generally removed by flushing with an inert gas. Argon is generally used for this purpose but helium is an alternative depending on gas cost and availability. Nitrogen has been used as a purge gas but is unsuitable for some stainless steels. The most common way to remove gas from the weld zone is to flush it away with an inert ...
The purge gas is inert, i.e. by definition [1] non-combustible, or more precisely, non-reactive. The most common purge gases commercially available in large quantities are nitrogen and carbon dioxide. Other inert gases, e.g. argon or helium may be used. Nitrogen and carbon dioxide are unsuitable purge gases in some applications, as these gases ...
For some applications it is necessary to use ultra high purity argon, 99.9998% purity and such applications requires the use of all high purity purge equipment (valves, regulators and flow control). Typically, no rubber components can be used for purge gas apparatus since the rubber absorbs and releases moisture and oxygen into the argon stream.
A cryogenic gas plant is an industrial facility that creates molecular oxygen, molecular nitrogen, argon, krypton, helium, and xenon at relatively high purity. [1] As air is made up of nitrogen, the most common gas in the atmosphere, at 78%, with oxygen at 19%, and argon at 1%, with trace gasses making up the rest, cryogenic gas plants separate air inside a distillation column at cryogenic ...
Fig. 1. The surface of a MEMS device is cleaned with bright, blue oxygen plasma in a plasma etcher to rid it of carbon contaminants. (100mTorr, 50W RF) Plasma cleaning is the removal of impurities and contaminants from surfaces through the use of an energetic plasma or dielectric barrier discharge (DBD) plasma created from gaseous species.
An ordinary glovebox, showing the two gloves for manipulation, with airlock on the right. The most straightforward type of air-free technique is the use of a glovebox.A "glove bag" uses the same idea, but is usually a poorer substitute because it is more difficult to purge, and less well sealed.
Oxygen deficiency gas monitors are used for employee and workforce safety. Cryogenic substances such as liquid nitrogen (LN2), liquid helium (He), and liquid argon (Ar) are inert and can displace oxygen (O 2) in a confined space if a leak is present. A rapid decrease of oxygen can provide a very dangerous environment for employees, who may not ...
Other gasses like hydrogen or argon are also used. Indeed, argon and hydrogen can be used before the nitriding process during the heating of the parts to clean the surfaces to be nitrided. This cleaning procedure effectively removes the oxide layer from surfaces and may remove fine layers of solvents that could remain.