Search results
Results from the WOW.Com Content Network
Straight-six engines typically use a firing order of 1-5-3-6-2-4. However, a firing order of 1-2-4-6-5-3 is common on medium-speed marine engines. V6 engines with an angle of 90 degrees between the cylinder banks have used a firing orders of R1-L2-R2-L3-L1-R3 or R1-L3-R3-L2-R2-L1. Several V6 engines with an angle of 60 degrees have used a ...
The 153 cu in engine had a 3 + 7 ⁄ 8-inch (98 mm) bore and 3 + 1 ⁄ 4-inch (82.6 mm) stroke, with two overhead valves per cylinder actuated by pushrods and a 1-3-4-2 firing order. The Chevy II 's 194 cu in six-cylinder used a 3 + 9 ⁄ 16 -inch (90.5 mm) bore, which by 1964 was enlarged to match the 153 four-cylinder's resulting in a ...
The Essex V4 is a 60° V4 engine with a cast iron cylinder block and heads. The engine block was just 20 in (510 mm) long. [3]: 60, 61 The engine uses crossflow cylinder heads with 2 overhead valves per cylinder operated through pushrods and rocker arms by a single camshaft in the block. Inlet valves had a diameter of 41 mm (1.6 in), while ...
A Chevrolet Impala 9C1 displayed at the 2008 Chicago Auto Show. 9C1 is a production code used by Chevrolet to designate a vehicle intended for use as a police car or car-based emergency vehicle. 9C1-designated vehicles are marketed under the Police Pursuit Vehicle or Police Patrol Vehicle (PPV) nameplate.
A flat-four engine, also known as a horizontally opposed-four engine or boxer engine, [1] is a four-cylinder piston engine with two banks of cylinders lying on opposite sides of a common crankshaft. The most common type of flat-four engine is the boxer-four engine , each pair of opposed pistons moves inwards and outwards at the same time.
A "twingle" is a four-stroke twin-cylinder engine with an altered firing order designed to give power pulses similar to a single-cylinder four-stroke engine. Inline twins with a 360° crankpin offset or flat-twins can be easily converted into twingles by firing both of the cylinders at the same time and installing a camshaft or camshafts that ...
The V angle between the cylinder banks is 15°, and the compression ratio is 10:1. [3] The crankshaft runs in seven main bearings and the journals are offset 22° to one another, in order to accommodate the offset cylinder placement. [4] This also allows the use of a 120° firing interval between cylinders. [5] The firing order is: 1, 5, 3, 6 ...
The turbocharger increased power output to 127 hp (95 kW) for the B21FT, and 155 hp (116 kW) for the B21ET. 6.5 psi (0.45 bar) boost on the B21FT and 9 psi (0.62 bar) boost on the B21ET. Also new for the 1981 model year in Canada (previously introduced in 1979 outside of North America) was the B23, with a displacement of 2.3 litres (80 mm (3.15 ...