Search results
Results from the WOW.Com Content Network
Turbo-Hydramatic 425 (TH425 or THM 425, [1] later 325) was an automatic transmission developed and produced by General Motors. The THM425 was a derivative of the THM400; most parts directly interchange and some others will interchange with minor modifications. The internal parts spin the opposite direction in the THM425; the helical angle of ...
In contrast to the fixed-grip version, the chairs of a detachable chair lift detach from the haul rope for loading and unloading. The significance of detachable chairlift technology is primarily the speed and capacity. Detachable chairlifts move far faster than their fixed-grip brethren, averaging 1,000 feet per minute (11.3 mph, 18 km/h, 5.08 ...
The Turbo-Hydramatic or Turbo Hydra-Matic (THM) series was developed to replace both the original Hydra-Matic models and the Buick Dynaflow. In its original incarnation as the Turbo-Hydramatic 400, it was first used in the 1964 model year in Cadillacs. The Buick version, which followed shortly thereafter, was known as the Super-Turbine 400.
Hydramatic transmissions were ultimately replaced by a new three-speed torque converter automatic transmission called Turbo-Hydramatic in 1964 and 1965, whose design was more similar in principle to the Chrysler TorqueFlite and the '51 Borg-Warner-designed Ford Cruise-O-Matic than the fluid coupling Hydra-Matic the "Turbo" replaced.
Klimov TV3-117 turboshaft engine. The accessory drive is the large casting on the top. The accessory drive is a gearbox that forms part of a gas turbine engine. [1] Although not part of the engine's core, it drives the accessories – such as generators, pumps for fuel and lubrication oil, air compressors, hydraulic pumps and engine starters – that are otherwise essential for the operation ...
(PVS manufactured these chairs in their Omaha, NE facility.) Curran re-engineered the banana hooks with chairs and created a machine with greater capacity than the up-ski toboggan and better comfort than the J-bar, the two most common skier transports at the time—apart from mountain climbing. His basic design is still used for chairlifts today.
The 8HP 70 transmission with the gearset 4 in 23-85-teeth-configuration was the pilot series and therefore without generation designation. It was first used in the BMW 7 Series (F01) 760Li, has a torque handling limit of 700 N⋅m (516 lb⋅ft), and weighs 87 kg (192 lb).
A 4-speed transaxle which replaced the 125, was created for the 1985–1986 GM C platform (FWD)/GM H platform (FWD) cars, the Turbo-Hydramatic 440-T4. Virtually no internal parts were shared with the 125, and overdrive was achieved by departing radically from the standard single Simpson compound planetary gearset 's common sungear layout.