Ad
related to: 12 volt motors high rpm engine conversion parts
Search results
Results from the WOW.Com Content Network
An electric supercharger is a specific type of supercharger for internal combustion engines that uses an electrically powered forced-air system that contains an electric motor to pressurize the intake air. By pressurizing the air available to the engine intake system, the air becomes more dense, and is matched with more fuel, producing the ...
As realized in the 2007 Volt concept, the initial E-Flex design includes an electric traction motor with peak power and torque outputs of 120 kW (160 hp) and 320 N⋅m (240 lbf⋅ft), a 1 L 3-cylinder gasoline engine coupled to a generator with an output of 53 kW (71 hp), and a 16 kWh (58 MJ) lithium-ion battery energy storage system.
For example, an unloaded motor of = 5,700 rpm/V supplied with 11.1 V will run at a nominal speed of 63,270 rpm (= 5,700 rpm/V × 11.1 V). The motor may not reach this theoretical speed because there are non-linear mechanical losses.
Output of these engines is commonly rated at 78 kW (105 hp; 106 PS) at 4,800 rpm and 185 N⋅m (136 lb⋅ft) at 2,800 rpm. In 1985, the engine was significantly reworked, output was up to 84 kW (113 hp; 114 PS) at 4,800 rpm and 190 N⋅m (140 lb⋅ft) at 3,600 rpm.
Conversions are popular [citation needed] due to a vast aftermarket and many compatible parts between engine versions. Some conversions are very easy; for instance, the supercharged 4A-GZE engine and electronic fuel injection (EFI) system are a direct plug-and-play conversion into a non-SC AW11 MR2. Even the SC-type wiring harness plugs ...
A ZQDR-410 traction motor (the large, dark component on the axle with small ventilation holes) A traction motor is an electric motor used for propulsion of a vehicle, such as locomotives, electric or hydrogen vehicles, or electric multiple unit trains.
SiC is used for the rear (main) motor to minimize conversion losses and to facilitate its use in high-voltage and high-current circuits. The front motor, on vehicles so equipped, will use silicon-based power electronics to reduce costs. [8] In 2022, Hyundai announced that it will switch to SiC for the front motor inverter also, improving ...
In 2013 a University of Central Florida design team, On the Green, worked to develop a bolt-on hybrid conversion kit to transform an older model vehicle into a gas-electric hybrid. [79] A conversion of a 1966 Mustang was demonstrated by an engineer in California. The system replaced the alternator with a 12 kW (30 kW peak) brushless electric motor.
Ad
related to: 12 volt motors high rpm engine conversion parts