Search results
Results from the WOW.Com Content Network
[2] [3] The attachment was developed to allow an infantryman to convert "their rifle to a form of submachine gun or automatic rifle" in approximately 15 seconds. [2] [3] Production of the Pedersen device and modified M1903 rifles started in 1918. [3] However, World War I ended before they could be fielded.
The Mark III rifles were newly made. They featured steel barrels which were so marked, flat nosed hammers, and a latch-locking breech block instead of the simple integral block lifting tang. The Snider–Enfield used a new type of metal-cased cartridge called a Boxer cartridge after its designer.
Originally (from 1889) Martini–Henry conversions used Metford rifled barrels (and were known as Martini–Metford rifles), which were more than suitable for the first .303 cartridges, which used black powder as a propellant but wore out very quickly when fired with cordite/nitrocellulose cartridges (introduced in 1895). In 1895, the Enfield ...
The rifle was designed with an iron sight line consisting of rear receiver aperture battle sight calibrated for 400 yd (366 m) with an additional ladder aperture sight that could be flipped up and was calibrated for 200–900 yd (183–823 m) in 100 yd (91 m) increments and 900–1,600 yd (823–1,463 m) in 50 yd (46 m) increments. The ladder ...
The Mark VII loading used a 174 gr (11.28 g) pointed bullet with a flat-base. The .303 British Mark VII cartridge was loaded with 37 gr (2.40 g) of Cordite MDT 5-2 (cordite MD pressed into tubes) and had a muzzle velocity of 2,440 ft/s (744 m/s) and a maximum range of approximately 3,000 yd (2,700 m).
The easiest way to identify a "jungle carbine" rifle is to look for the markings on the left hand side of the receiver; a genuine No. 5 will have "Rifle No 5 Mk I" electrostencilled there, [22] while a post-war conversion will generally have either no markings or markings from manufacturers who did not make the No. 5 Mk I (for example, Savage ...
The Mark II had a tendency to split at the base, so the Cartridge S.A. Ball Martini Henry Rifle Rolled Case Mark III was developed which had two layers of .004 in brass overlapped by .5 in (13 mm) with a .004 in brass strengthening strip with a small sight hole punched in the outer coil as a visual check that the strip was correctly placed and ...
A C79 Optical Sight. The C79 optical sight (SpecterOS3.4x) is a telescopic sight manufactured by Elcan. A variant, the M145 Machine Gun Optic is in use by the US military. It is 3.4×28, meaning 3.4x magnification, and a 28mm diameter objective lens. A tritium illuminated reticle provides for normal and low-light conditions sighting. [1]