Search results
Results from the WOW.Com Content Network
The weak point of a gas engine compared to a diesel engine is the exhaust valves, since the gas engine exhaust gases are much hotter for a given output, and this limits the power output. Thus, a diesel engine from a given manufacturer will usually have a higher maximum output than the same engine block size in the gas engine version.
Ignition system of a flat-twin Citroën 2CV. A wasted spark system is a type of ignition system used in some four-stroke cycle internal combustion engines.In a wasted spark system, the spark plugs fire in pairs, with one plug in a cylinder on its compression stroke and the other plug in a cylinder on its exhaust stroke.
The World Gasoline Engine is a family of straight-4 piston engines, based on the Global Engine Alliance design. Three engines have been produced: a 1.8 L, a 2.0 L, and a 2.4 L. The initial design of the engine block and cylinder head was handled by Hyundai as part of the Global Engine Alliance.
Lean-burn gas engines are almost always turbocharged, resulting in high power and torque figures not achievable with stoichiometric engines due to high combustion temperatures. Heavy duty gas engines may employ precombustion chambers in the cylinder head. A lean gas and air mixture is first highly compressed in the main chamber by the piston.
A 'flat' engine may either be a 180-degree V engine or a 'boxer' engine. A 180-degree V engine as used in the Ferrari 512BB has opposed cylinder pairs whose connecting rods use the same crank throw. Contrary to this, in a 'boxer' engine, as applied in BMW motorcycles, each connecting rod has its own crank throw which is positioned 180 degrees ...
Similar to U engines, H engines consist of two separate flat engines joined by gears or chains. H engines have been produced with between 4 and 24 cylinders. An opposed-piston engine is similar to a flat engine in that pairs of pistons are co-axial but rather than sharing a crankshaft, instead share a single combustion chamber per pair of ...
Engines must be designed so that ignition conditions occur at the desired timing. To achieve dynamic operation, the control system must manage the conditions that induce combustion. Options include the compression ratio, inducted gas temperature, inducted gas pressure, fuel-air ratio, or quantity of retained or re-inducted exhaust.
In engines with wall-guided injection, the distance between spark plug and injection nozzle is relatively high. In order to get the fuel close to the spark plug, it is sprayed against a swirl cavity on top of the piston (as seen in the picture of the Ford EcoBoost engine on the right), which guides the fuel towards the spark plug.