Search results
Results from the WOW.Com Content Network
The 213.3 cu in (3.495 L) was used by the Oldsmobile F-Series between 1932 and 1936 and also by GMC in their 1936 T-14 and T-16 trucks. [1] It used a 3 5/16" bore and 4 1/8" stroke and on its introduction in 1932 had a compression ratio of 5.3:1 and made 74 bhp at 3200 RPM.
The coil-in-cap HEI distributor was retired, and an all-new electronic distributor design was used. The intake manifold to head bolt pattern was redesigned to improve gasket integrity—four of the center intake manifold bolts were drilled at 72° instead of 90° for the cast iron cylinder heads. Changes to the valve covers were also made.
The cylinder firing order was changed to 1-8-7-2-6-5-4-3 [43] so that the LS series now corresponds to the firing pattern of other modern V8 engines (for example the Ford Modular V8). 3.898 in. bore blocks (1997–2005)
It is one of many models in the 300 series of engines, which were developed during and after World War II, while specifically the OM352 was revealed in 1964.The OM352's lineage can be traced back to the OM311, [1] itself an 80 PS (59 kW) inline-six engine. [2]
GM's German subsidiary, Opel, relies on a range of three-, four- and six-cylinder gasoline and diesel engines. A survey [citation needed] of their range shows a reliance on petrol and diesel four-cylinders, and in 2014, there was only one 3-cylinder engine and one 6 cylinder engine in service in Opel's passenger car range.
The fuel system operates by plunger and nozzle and is of the high pressure solid injection type (Zexel in-line Bosch A-type). The starter motor is a 12 V unit. The firing order 1-3-4-2. 18.6 48 kW (65 PS) at 2500 rpm 205 N⋅m (151 lb⋅ft; 20.9 kg⋅m) OHV 4JG1T The 4JG1T engine is a turbocharged version of the 4JG1. Notable differences ...
The Holden V8 engine, also known colloquially as the Iron Lion engine, is an overhead valve (OHV) V8 engine that was produced by the Australian General Motors subsidiary, Holden (GMH), between 1969 and 2000.
The electrical system was a 6-volt primary with a negative ground, and a conventional mechanical ignition, with the firing order 1-6-2-5-8-3-7-4. The Pontiac engines employed a full pressure oiling system and full bearing inserts, unlike its Chevrolet cousin.