Search results
Results from the WOW.Com Content Network
The Musa connector (for Multiple Unit Steerable Array/Antenna) is a type of coaxial ("coax") connector, originally developed for the manual switching of radio signals. It has a characteristic impedance of 75 Ω, [ 1 ] and was adopted for use in the emerging television broadcast industry.
It is possible to also get a bad picture if the signal strength of the TV transmitter is too high. An attenuator inserted in the antenna lead-in wire may be used if the television receiver displays signs of overload in the RF front end. Strong out-of-band signals may also affect television reception and may require band-pass filters to reduce ...
An antenna tuner, a matchbox, transmatch, antenna tuning unit (ATU), antenna coupler, or feedline coupler is a device connected between a radio transmitter or receiver and its antenna to improve power transfer between them by matching the impedance of the radio to the antenna's feedline. Antenna tuners are particularly important for use with ...
Space-division multiple access (SDMA) is a channel access method based on creating parallel spatial pipes (focused signal beams) using advanced antenna technology next to higher capacity pipes through spatial multiplexing and/or diversity, by which it is able to offer superior performance in radio multiple access communication systems (where multiple users may need to use the communication ...
A monoblock (or monobloc) LNB is a single unit comprising two, three or four LNBs and a DiSEqC switch, designed to receive signals from two, three or four satellites spaced close together and to feed the selected signal to the receiver. The feedhorns of the two LNBs are at a fixed distance apart for reception of satellites of a particular ...
Beam steering is a technique for changing the direction of the main lobe of a radiation pattern.. In radio and radar systems, beam steering may be accomplished by switching the antenna elements or by changing the relative phases of the RF signals driving the elements.
A mixer in the dish-end equipment (an LNB or distribution unit) converts the received signal to the correct user band IF centre frequency for that receiver. [3] The converted transponders of the various users are then combined, and sent via the single coaxial cable to the receivers. The combined signal is tapped or split to reach every user.
Repair and restoration of vintage amateur radio equipment may involve replacing vacuum tubes, reforming electrolytic capacitors if needed, replacing any faulty resistors, replacing two-wire power cords with three-wire cords except on transformerless AC/DC radios, and receiver alignment as necessary.