Search results
Results from the WOW.Com Content Network
Lapping machine. Lapping is a machining process in which two surfaces are rubbed together with an abrasive between them, by hand movement or using a machine. Lapping often follows other subtractive processes with more aggressive material removal as a first step, such as milling and/or grinding. Lapping can take two forms.
The process uses an abrasive and corrosive chemical slurry (commonly a colloid) in conjunction with a polishing pad and retaining ring, typically of a greater diameter than the wafer. The pad and wafer are pressed together by a dynamic polishing head and held in place by a plastic retaining ring.
Abrasive machining is a machining process where material is removed from a workpiece using a multitude of small abrasive particles. Common examples include grinding, honing, and polishing. Abrasive processes are usually expensive, but capable of tighter tolerances and better surface finish than other machining processes
Polishing lines will be soft and less reflective than a #4 architectural finish. #7 Finish. A #7 finish is produced by polishing with a 280–320 grit belt or wheel and sisal buffing with a cut and color compound. This is a semi-bright finish that will still have some polishing lines but they will be very dull.
Polishing is the process of creating a smooth and shiny surface by rubbing it or by applying a chemical treatment, leaving a clean surface with a significant specular reflection (still limited by the index of refraction of the material according to the Fresnel equations). [1]
Polishing is a more aggressive process, while buffing is less harsh, which leads to a smoother, brighter finish. [1] A common misconception is that a polished surface has a mirror-bright finish, however, most mirror-bright finishes are actually buffed.
As part of the reward, Goodman immediately lets him go back to his mom in the office, and repeats this process for a few minutes. Eugene then begins to come with Goodman more willingly.
The process is usually optimized to ensure that the resulting texture is usable. If necessary, an additional process will be added to modify the initial texture. The latter process may be grinding (abrasive cutting) , polishing , lapping , abrasive blasting , honing , electrical discharge machining (EDM), milling , lithography , industrial ...