enow.com Web Search

Search results

1. Results from the WOW.Com Content Network

2. ISO 5775 - Wikipedia

   en.wikipedia.org/wiki/ISO_5775

   The overall diameter of the tire is then the rim diameter plus twice the tire's section height. The ISO 5775-1 standard also defines procedures for measuring tires and for calculating from the marking the maximum dimensions of a tire, which are needed by designers to determine clearance distances to other bicycle components.

3. Wheel sizing - Wikipedia

   en.wikipedia.org/wiki/Wheel_sizing

   Modern road tires have several measurements associated with their size as specified by tire codes like 225/70R14. The first number in the code (e.g., "225") represents the nominal tire width in millimeters. This is followed by the aspect ratio (e.g.,"70"), which is the height of the sidewall expressed as a percentage of the nominal tire width.

4. Gear inches - Wikipedia

   en.wikipedia.org/wiki/Gear_inches

   For example, consider a 700c × 23 mm tire, which has a nominal cross-section of 23 mm. 700c wheels have a rim diameter of 622 mm. Hence the wheel diameter is (2 × 23 mm) + 622 mm = 668 mm which is equal to 26.3 inches (rounded to 1 decimal place). 26 inch mountain bicycle wheels have a rim diameter of 559 mm. This ignores factors that ...

5. Tire code - Wikipedia

   en.wikipedia.org/wiki/Tire_code

   Prior to 1964, tires were all made to a 90% aspect ratio. Tire size was specified as the tire width in inches and the diameter in inches – for example, 6.50-15. [24] From 1965 to the early 1970s, tires were made to an 80% aspect ratio. Tire size was again specified by width in inches and diameter in inches.

6. Bicycle gearing - Wikipedia

   en.wikipedia.org/wiki/Bicycle_gearing

   A 700c "standard" wheel has a 622 mm rim diameter. The final wheel diameter depends on the specific tire but will be approximately 622 mm plus twice the tire width. Front/rear measurement only considers the sizes of a chainring and a rear sprocket. Gear inches and metres of development also take the size of the rear wheel into account.

7. 29er (bicycle) - Wikipedia

   en.wikipedia.org/wiki/29er_(bicycle)

   29er rims have an interior diameter of 622 millimetres (24.5 in) [1] and the average 29″ mountain bike tire is (in ISO notation) 59-622 – corresponding to an outside diameter of about 29.15 inches (740 mm). The typical 26″ MTB tire has a rim diameter of 559 millimetres (22.0 in) and an outside tire diameter of about 26 inches (660 mm). [2]