Search results
Results from the WOW.Com Content Network
Unified Display Interface (UDI) was a digital video interface specification released in 2006 which was based on Digital Visual Interface (DVI). It was intended to be a lower cost implementation while providing compatibility with existing High-Definition Multimedia Interface (HDMI) and DVI displays.
It can also carry audio, USB, and other forms of data. DisplayPort is backward compatible with other interfaces such as HDMI and DVI through the use of active or passive adapters. Male Mini DisplayPort plug Mini DisplayPort: Proposed alternative to HDMI, used with computer displays: (VGA, DVI) Apple Inc.'s successor to their own Mini-DVI.
A monitor is typically connected to its host computer via DisplayPort, HDMI, USB-C, DVI, or VGA. Monitors sometimes use other proprietary connectors and signals to connect to a computer, which is less common. Originally computer monitors were used for data processing while television sets were used for video.
USB signals are transmitted using differential signaling on a twisted-pair data cable with 90 Ω ± 15% characteristic impedance. [6] Low speed (LS) and Full speed (FS) modes use a single data pair, labelled D+ and D−, in half-duplex. Transmitted signal levels are 0.0–0.3 V for logical low, and 2.8–3.6 V for logical high level.
Consumer Electronics Control (CEC) is a feature of HDMI designed to control HDMI connected devices [1] [2] by using only one remote controller; so, individual CEC enabled devices can command and control each other without user intervention, for up to 15 devices.
A standard HDMI cable HDMI wires in connector exposed. An HDMI cable is composed of four shielded twisted pairs, with impedance of the order of 100 Ω (±15%), plus seven separate conductors. HDMI cables with Ethernet differ in that three of the separate conductors instead form an additional shielded twisted pair (with the CEC/DDC ground as a ...
Examples of computer connector sockets on various laptops Ports on the back of the Apple Mac Mini (2005) A computer port is a hardware piece on a computer where an electrical connector can be plugged to link the device to external devices, such as another computer, a peripheral device or network equipment. [1] This is a non-standard term.
This means that one would not be able to extend the cable using a standard USB-C 3.0 cable, which has these pins mapped only for unshielded USB 2.0 signals. Also this required the VirtualLink port to also detect the correct orientation of the USB-C plug to ensure that the USB 3.0 TX and RX lanes are correctly connected.