Search results
Results from the WOW.Com Content Network
The largest component of the average price of $2.80/gallon of regular grade gasoline in the United States from 2012 through 2021, representing 54.8% of the price of gas, was the price of crude oil. The second largest component during the same period was taxes—federal and state taxes representing 17% of the price of gas.
3.0 Nevada: 2.0: 1.0: also subject to additional county taxes, up to 8 cents per gallon on Aviation Fuel, 4 cents per gallon for Jet Fuel New Hampshire: 4.0: 2.0: The rate for Jet Fuel for aircraft operating under FAR Part 121 is 0.5 cents per gallon New Jersey: 10.56: 13.56 New Mexico: 17.0: See notes: Jet Fuel is subject to gross receipts tax ...
One GGE of natural gas is 126.67 cubic feet (3.587 m 3) at standard conditions. This volume of natural gas has the same energy content as one US gallon of gasoline (based on lower heating values: 900 BTU/cu ft (9.3 kWh/m 3) of natural gas and 114,000 BTU/US gal (8.8 kWh/L) for gasoline). [22]
In the United States, SIPs tend to come in sizes from 4 to 24 feet (1.2–7.3 m) in width. Elsewhere, typical product dimensions are 300, 600, or 1,200 mm wide and 2.4, 2.7, and 3 m long, with roof SIPs up to 6 m long.
The most commonly used thickness range is from 1 ⁄ 8 to 3 inches (3.2–76.2 mm). The sizes of the most commonly used plywood sheets are 4 by 8 feet (1,220 mm × 2,440 mm) [20] which was first used by the Portland Manufacturing Company, who developed modern veneer core plywood for the 1905 Portland World Fair. A common metric size for a sheet ...
Depending on the diameter of the log, cuts are made from 4 + 1 ⁄ 2 to 6 + 1 ⁄ 2 inches (110 to 170 mm) deep along the full length of the log. Each time the log turns for the next cut, it is rotated 5 ⁄ 8 inch (16 mm) until it has turned 360°. This gives the radially sawn clapboard its taper and true vertical grain.