Search results
Results from the WOW.Com Content Network
{{Convert}} uses unit-codes, which are similar to, but not necessarily exactly the same as, the usual written abbreviation for a given unit. These unit-codes are displayed in column 3 of the following tables. These are accepted as input by {{convert}} as the second and third unnamed parameters: {{convert|100|kg|lb}} → 100 kilograms (220 lb)
1.5 US gallons (5.7 litres) of ethanol has the same energy content as 1.0 US gal (3.8 L) of gasoline. The energy content of ethanol is 76,100 BTU/US gal (5.89 kilowatt-hours per litre), compared to 114,100 BTU/US gal (8.83 kWh/L) for gasoline. (see chart above)
The first of the family, the 3.3 liter engine's actual piston displacement is 3.3 L; 201.4 cu in (3,301 cc) with a 93 mm × 81 mm (3.66 in × 3.19 in) bore and stroke. In 1994, the 3.3 received a 12 hp (9 kW) increase in power to 162 hp (121 kW) due to a new air intake .
Therefore, they are generally taxed as 1.5 times [citation needed] their stated physical displacement (1.3 litres becomes effectively 2.0, 2.0 becomes effectively 3.0), although actual power outputs can be higher than suggested by this conversion factor. The nominal displacement of a Wankel engine is 3 times smaller than the physical ...
In response to rising gas prices, a larger 251.9 cu in (4.1 L; 4,128 cc) version of the 3.8 liter LD5 V6 was produced from 1980 through 1984 and marketed as an alternative to a V8. The bore was enlarged to 3.965 in (100.7 mm), yielding an output of 125 hp (93 kW) and 205 lb⋅ft (278 N⋅m).
The large-journal connecting rods were thicker (heavier) and used 3 ⁄ 8 in (9.5 mm) diameter cap-bolts to replace the small-journal's 11/32. 1968 blocks were made in 2-bolt and 4-bolt versions with the 4-bolt center-three main caps each fastened by two additional bolts which were supported by the addition of thicker crankcase main-web bulkheads.
A 3.1 L (3,135 cc) version was added in 1990 with an 8 mm (0.3 in) longer stroke (now 84mm), and a 3.4 L (3,350 cc) appeared for 1993 with a 92 mm (3.6 in) bore and SFI. Production of the 2.8 and 3.1 L (2,837 and 3,135 cc) engines ended in 1994. Production ended for all longitudinal 60° V6s in 1996.
2017–present 1.5 L Dragon Ti-VCT I3, naturally aspirated. Displacement: 1497 cc; Bore x stroke: 84.0 mm x 90.0 mm; Compression ratio: 11.0:1