Search results
Results from the WOW.Com Content Network
[44] [45] It may be made by diluting household bleach as appropriate (normally 1 part bleach to 9 parts water). [46] Such solutions have been demonstrated to inactivate both C. difficile [44] and HPV. [47] "Weak chlorine solution" is a 0.05% solution of hypochlorite used for washing hands, but is normally prepared with calcium hypochlorite ...
Calcium hypochlorite is an inorganic compound with chemical formula Ca(Cl O) 2, also written as Ca(OCl) 2.It is a white solid, although commercial samples appear yellow. It strongly smells of chlorine, owing to its slow decomposition in moist air.
The EPA recommends two drops of 8.25% sodium hypochlorite solution (regular, unscented chlorine bleach) mixed per one quart/liter of water and leave to stand covered for 30 to 60 minutes. Two drops of 5% solution also suffices. Double the amount of bleach if the water is cloudy, colored, or very cold.
A 1-in-47 dilution of household bleach with water (1 part bleach to 47 parts water: e.g. one teaspoon of bleach in a cup of water, or 21 ml per litre, or 1 / 3 cup of bleach in a gallon of water) is effective against many bacteria and some viruses in homes. [33]
Water for injection is generally made by distillation or reverse osmosis. [5] It should contain less than a mg of elements other than water per 100 ml. [5] Versions with agents that stop bacterial growth are also available. [5] In the UK, some hospitals offer subcutaneous injections of water directly for treating back pain in labour.
The "dilution factor" is an expression which describes the ratio of the aliquot volume to the final volume. Dilution factor is a notation often used in commercial assays. For example, in solution with a 1/5 dilution factor (which may be abbreviated as x5 dilution ), entails combining 1 unit volume of solute (the material to be diluted) with ...
Mixing a hypochlorite bleach with an acid can liberate chlorine gas. Chlorine is a respiratory irritant that attacks mucous membranes and burns the skin. As little as 3.53 ppm can be detected as an odor, and 1000 ppm is likely to be fatal after a few deep breaths.
Mixing of liquids occurs frequently in process engineering. The nature of liquids to blend determines the equipment used. Single-phase blending tends to involve low-shear, high-flow mixers to cause liquid engulfment, while multi-phase mixing generally requires the use of high-shear, low-flow mixers to create droplets of one liquid in laminar, turbulent or transitional flow regimes, depending ...