Search results
Results from the WOW.Com Content Network
However, most chemical literature traditionally uses mol/dm 3, which is the same as mol/L. This traditional unit is often called a molar and denoted by the letter M, for example: 1 mol/m 3 = 10 −3 mol/dm 3 = 10 −3 mol/L = 10 −3 M = 1 mM = 1 mmol/L. The SI prefix "mega" (symbol M) has the same symbol. However, the prefix is never used ...
For example, if the static compression ratio is 10:1, and the dynamic compression ratio is 7.5:1, a useful value for cylinder pressure would be 7.5 1.3 × atmospheric pressure, or 13.7 bar (relative to atmospheric pressure). The two corrections for dynamic compression ratio affect cylinder pressure in opposite directions, but not in equal strength.
masses of ions, used to identify chemical substances through their mass spectra measuring cup: liquid and dry goods measuring cylinder: volume measuring spoon: a spoon used to measure an amount of an ingredient, either liquid or dry megger: electrical insulation mercury barometer: Atmospheric pressure micrometer: small distances multimeter
At 6.24 m (20.5 ft), the length of the KwK 43's barrel was over 1.3 metres longer than of that of the 8.8 cm KwK 36 used for the Tiger I.The cartridge of the KwK 43's shell was also considerably longer (at 82.2 centimetres (32.4 in)) and wider than that of the KwK 36's, meaning that the KwK 43 allows for more room for a heavier propellant charge in its cartridge case than the KwK 36 could.
Roark's Formulas for Stress and Strain is a mechanical engineering design book written by Richard G. Budynas and Ali M. Sadegh. It was first published in 1938 and the most current ninth edition was published in March 2020.
Each of the formulas listed in the tables assumes that the roughness profile has been filtered from the raw profile data and the mean line has been calculated. The roughness profile contains n {\displaystyle n} ordered, equally spaced points along the trace, and y i {\displaystyle y_{i}} is the vertical distance from the mean line to the i th ...
The 8.8 cm SK C/31 gun weighed 4,255 kilograms (9,381 lb), had an overall length of 6.87 meters (22 ft 6 in) and its bore length was 6.341 meters (20 ft 9.6 in). It used a vertical sliding-block breech design. The gun was normally on the twin gun carriage (German: Doppel Lafette or abbreviated Dopp. L) C/31, the mount plus guns weighed 27,300 ...
The Flak 38 was introduced as a competitor to the 8.8 cm Flak 18. In this role it proved to be too heavy for field use while having roughly similar performance as the 88 mm, therefore it was used primarily in static mounts. [2] The Flak 39 was an improved version, which replaced the electrical gun laying system with a mechanical one.