Search results
Results from the WOW.Com Content Network
Ford developed two high-performance street versions of the 429 between 1969 and 1971, the Cobra Jet and Super Cobra Jet. The Cobra Jet (429CJ) was fitted with a Rochester Quadrajet 715 cu ft/min (20.2 m 3 /min) Spreadbore 4-bbl carburetor, a larger camshaft; a special set of cylinder heads (DOOE-R) 73.5 CC, combustion chamber and canted valve ...
The Chevrolet 90° V6 family of V6 engines began in 1978 with the Chevrolet 200 cu in (3.3 L) as the base engine for the all new 1978 Chevrolet Malibu.The original engine family was phased out in early 2014, with its final use as the 4.3 L (262 cu in) V6 engine used in Chevrolet and GMC trucks and vans.
Later models came with hydraulic clutches. These were commonly found in Pintos, some Mustang II/Capris, and Rangers but do not match the V6 Bell housings. Changing the engine to a V6 often requires changing the bellhousing (Mitsubishi) but the Mazda trans had an integral bell. 2.6, 2.8, 2.9, and 2.9 Cosworth. Most of these were RWD car engines.
For this inline-4 engine, 1-3-4-2 could be a valid firing order. The firing order of an internal combustion engine is the sequence of ignition for the cylinders. In a spark ignition (e.g. gasoline/petrol) engine, the firing order corresponds to the order in which the spark plugs are operated. In a diesel engine, the firing order corresponds to ...
The first was the 429 Thunder Jet, the standard engine for the Cobra, rated at 360 hp (270 kW). Next was the 429 CJ (Cobra Jet), rated at 370 hp (276 kW), which included a 2-bolt main block, hydraulic lifters, a 700 CFM Holley or 715 CFM Rochester Quadrajet carburetor, and was available with or without Ram Air. The top option was the 429 SCJ ...
429 Ford Thunderjet The 1968 Thunderbird saw the introduction of the new 385 series big-block "Thunder Jet" 4V (4 barrel carburetor) 429 cu in (7.0 L) V8 engines . Like many Ford engines of the time, they were conservatively rated at 360 hp (268 kW) (SAE gross).
Since there is no room in the V between the cylinder banks for an intake system, all the intakes are on one side of the engine, and all the exhausts are on the other side. It uses a firing order of 1-5-3-6-2-4 (which is the firing order used by most straight-six engines), rather than the common V6 firing order of 1-2-3-4-5-6 or 1-6-5-4-3-2.
The 428 Cobra Jet was a performance version of the 428 FE. Launched in April 1968, it was built on a regular production line using a variety of cylinder heads [30] combined with a 735 CFM Holley four-barrel carburetor. The Cobra Jet used heavier connecting rods with a 13/32 rod bolt and a nodular iron crankshaft casting #1UB.