Search results
Results from the WOW.Com Content Network
The General Electric T901 (GE3000 [3]) is a turboshaft engine in the 3,000 shp (2,200 kW) class currently under development for the United States Army's Improved Turbine Engine Program (ITEP). The ITEP plans after 2025 to re-engine over 1,300 Sikorsky UH-60 Black Hawk and more than 600 Boeing AH-64 Apache , and was intended to power the now ...
A link between a gas turbine compressor and its engine can be shown with lines of constant engine temperature ratio, ie the effect of fuelling/increased turbine temperature which raises the running line as the temperature ratio increases. One manifestation of different behaviour appears in the choke region on the right-hand side of a map.
The Pearl engine was developed in Dahlewitz from the BR700 with Advance2 technologies. [16] EASA certification was applied for on 28 February 2015. [9] It made its first ground run in 2015, type tests in 2016, and flight tests in 2017. [17] Six test engines logged over 6,000 cycles on 2,000 test hours. [18]
GEnx on 747-8I prototype. As of 2016, the GEnx and the Rolls-Royce Trent 1000 were selected by Boeing following a run-off between the three big engine manufacturers. The GEnx uses some technology from the GE90 turbofan, [1] including swept composite fan blades and the 10-stage high-pressure compressor (HPC) featured in earlier variants of the engine.
In addition to 3,000-shp output, the targets for AATE were a 25% reduction in fuel consumption (less than 0.347 lb/(hp⋅h), 211 g/kWh), a 65% improvement in power to weight (more than 6.5 hp/lb, 10.7 kW/kg), a 20% improvement in design life (more than 6000 hours and 15000 cycles), a 35% reduction in production (less than $650k per engine) and maintenance cost, and a 15% reduction in product ...
The LEAP-1A was tested on GE's 747-400 flying test platform. [18] CFM carried out the first test flight of a LEAP-1C in Victorville, California, with the engine mounted on the company's Boeing 747 flying testbed aircraft on 6 October 2014. The -1C version features a thrust reverser equipped with a one-piece O-ring replacing a two-piece door.
The YF119-PW-614 on the X-32 had a pitch-axis thrust vectoring nozzle and valves can redirect the engine exhaust and bleed air to provide direct lift, similar to the Pegasus engine on the Harrier. In contrast, YF119-PW-611 on the X-35 had a round axisymmetric nozzle that can swivel downwards while the low-pressure spool drives a lift fan that's ...
The JT8D is an axial-flow front turbofan engine incorporating a two-spool design. There are two coaxially-mounted independent rotating assemblies: one rotating assembly for the low pressure compressor (LPC) which consists of the first six stages (i.e. six pairs of rotating and stator blades, including the first two stages which are for the bypass turbofan), driven by the second (downstream ...