Search results
Results from the WOW.Com Content Network
The clearance for overhead signs is 5.7 metres (18 ft 8 in) and the clearance for the soffit or underside of overpasses is 10 metres (32 ft 10 in). [ 6 ] In South Africa and the southern region of Africa, the minimum vertical clearance of modern bridges is 5 metres (16 ft 5 in), although the legal height limit of road vehicles is still at 4.3 ...
Vertical clearance: The minimum vertical clearance under overhead structures, such as bridges, is 16 feet (4.9 m), including both paved shoulders and an allowance for extra layers of pavement. Through urban areas, at least one routing is to have 16-foot (4.9 m) clearances, but others may have a lesser clearance of 14 feet (4.3 m).
The old standard North American passenger railcar is 10 ft 6 in (3.20 m) wide by 14 ft 6 in (4.42 m) high and measures 85 ft 0 in (25.91 m) over coupler pulling faces with 59 ft 6 in (18.14 m) truck centers, or 86 ft 0 in (26.21 m) over coupler pulling faces with 60 ft 0 in (18.29 m) truck centers.
The code also defines the clearance that is shorter than the physical clearance to account for sag curves, bridge deflection and expected settlements with a recommendation of minimum clearance of 5 metres (16 ft 5 in). [2] In UK, the "standard minimum clearance" for structures over public highways is 16 feet 6 inches (5.03 m). [3]
Part 542: [89] Procedures for selecting light duty truck lines to be covered by the theft prevention standard; Part 543: [90] Exemption from vehicle theft prevention standard; Part 544: [91] Insurer reporting requirements; Part 545: [92] Federal motor vehicle theft prevention standard phase-in and small-volume line reporting requirements
L1 penalties concern areas of minimum heights and weights, the Laser Inspection Station (LIS), gear ratios, 18 or 19 tightened lug nuts (Xfinity or Truck) or minor under-torque violations (Cup with center-lock hub), or used engine violations. Penalties will be a 10-40 point deduction, suspension for 1-3 races, plus a fine up to $75,000.
Fire lanes may be any width larger than 20 feet (6.1m) across. This gives enough room to maneuver the truck into position. They must also be at least ten feet away from any building or structure overhang to allow overhead clearance. If trees are near a fire lane, they must be trimmed to allow a 14-foot (4.25m) clearance over the fire lane. [1]
Outside North America some rail routes have been built or upgraded to such standards as to allow both electrification with overhead wires and double stacking. [6] [7] CSX lists three clearance heights above top of rail for double stack service: [8] Doublestack 1 — 18 ft 2 in (5.54 m) [8] Doublestack 2 — 19 ft 2 in (5.84 m) [8]