Search results
Results from the WOW.Com Content Network
The boat is normally fitted with a small outboard motor of 7.5 to 15 hp (6 to 11 kW) for docking and maneuvering, although a Yanmar inboard diesel engine of 9 hp (7 kW) was a factory option. The fresh water tank has a capacity of 40 U.S. gallons (150 L; 33 imp gal).
The boat is normally fitted with a small 4 to 8 hp (3 to 6 kW) outboard motor for docking and maneuvering. [ 1 ] [ 6 ] The design has sleeping accommodation for five people, with a double "V"-berth in the bow cabin, a drop-down dinette table that forms a double berth in the main cabin to port and an aft quarter berth on the starboard side.
The MacGregor 25 is an American trailerable sailboat that was designed by Roger MacGregor and first built in 1973. From the start of production until 1980, it was sold as the Venture 25 . [ 1 ] [ 2 ] [ 3 ]
The boat has a draft of 4.00 ft (1.22 m) with the standard keel. The fresh water tank has a capacity of 5 U.S. gallons (19 L; 4.2 imp gal). [1] [3] The boat is normally fitted with a small 4 to 6 hp (3 to 4 kW) outboard motor for docking and maneuvering. [4]
The boat displaces 4,800 lb (2,177 kg) and carries 1,900 lb (862 kg) of ballast. [1] [2] The boat has a draft of 2.50 ft (0.76 m) with the standard keel fitted. [1] [2] The boat is normally fitted with a small 6 to 12 hp (4 to 9 kW) outboard motor for docking and maneuvering, although an inboard diesel engine of 12 hp (9 kW), was optional. [2]
The boat has a draft of 3.33 ft (1.01 m) with the standard keel. [1] [3] The boat is fitted with a Japanese Yanmar diesel engine of 8 hp (6 kW) for docking and maneuvering. The fuel tank holds 16 U.S. gallons (61 L; 13 imp gal) and the fresh water tank has a capacity of 14 U.S. gallons (53 L; 12 imp gal).
Hunter 25-2 showing rudder and walk-through transom. The Hunter 25-2 is a recreational keelboat, built predominantly of fiberglass, with wood trim.It has a B&R masthead sloop rig with aluminum spars, a raked stem, a walk-through, rounded reverse transom, a transom-hung rudder controlled by a wheel and a fixed fin shoal draft keel.
C&C 25 Mk II or 25-2 This model was a complete redesign of the earlier C&C 25 by Robert W. Ball and introduced in 1980. A smaller and lighter boat than its predecessor, it has a length overall of 25.08 ft (7.6 m), a waterline length of 20.00 ft (6.1 m), displaces 4,150 lb (1,882 kg) and carries 1,880 lb (853 kg) of lead ballast.