Search results
Results from the WOW.Com Content Network
If water is used, the time should be 26 +/- 0.5 seconds. [2] If the time is less than this the tube is probably enlarged by erosion, if more it may be blocked or damaged, and the funnel should be replaced. In some companies, and Europe in particular, the volume collected is a litre, for which the water funnel time should be 28 seconds.
Different grout may be needed for fine grained and coarse grained soils in the grouted area. The greatest use of pressure grouting is to improve geomaterials (soil and rock). The purpose of grouting can be either to strengthen a formation or to reduce water flow through it. It is also used to correct faults in concrete and masonry structures.
Non-shrink grout is a hydraulic cement grout that, when hardened under stipulated test conditions, does not shrink, so its final volume is greater than or equal to the original installed volume. It is often used as a transfer medium between load-bearing members.
Grout sealer is a water-based or solvent-based sealant applied over dried grout that resists water, oil, and acid-based contaminants. Grout cleaner is a basic cleaning solution that is applied on grout lines and removes the dirt and dust. [9] A die grinder is used for faster removal of old grout compared to a standard grout saw.
A grout curtain is a barrier that protects the foundation of a dam from seepage and can be made during initial construction or during repair. [1] Additionally, they can be used to strengthen foundations and contain spills.
Get AOL Mail for FREE! Manage your email like never before with travel, photo & document views. Personalize your inbox with themes & tabs. You've Got Mail!
Grout joints are traditionally about 3 ⁄ 8 inch in width. Matching trim shapes such as coves , bases, shoes, and bullnoses are available to turn corners and terminate runs of the tile. For traditional/historic applications, tiles were generally laid in lime mortar, doubling as grout, and with very fine grout joints (sometimes butted without ...
The width of the throat determines the flume size; 22 standardized sizes have been developed, ranging from 1 in to 50 ft (0.005 ft 3 /s to 3,280 ft 3 /s). A venturi flume is similar to the Parshall flume, without the contoured base, but the cross section is usually rectangular, the inlet shorter, and there is a general taper on the outlet ...