Search results
Results from the WOW.Com Content Network
In 1968, the engine displacement was increased again to 1298 cc with new bore and strokes of 78.5 mm x 67.1 mm and also renamed to R92B. Equipped with new two Mikuni-Solex 50PHH carburettors, the power also increased to 140 PS (103 kW) at 8000rpm with 127 N.m at 7000 rpm of torque.
Circa-1960 Saab two-stroke engine 2010 Suzuki K10B engine. Among the first cars to use a straight-three engine is the 1953–1955 DKW F91, powered by a 900 cc (55 cu in) two-stroke engine, although this was predated by the 3 cylinder 15hp Rolls Royce produced in 1905 and a number of other cars of this era also used 3 cylinder engines.
Ranging from 1.3 L up to 1.6 L, these four-cylinder engines were built with lightness in mind, featuring a hollow crankshaft and camshaft, and the weight of a four-cylinder engine (1.3 L HC) is similar to the 1.0 L three-cylinder CB engines. [1] The H-series engine has aluminium engine blocks and cylinder heads, timing belt driven heads, water ...
The first IHC "Highwheeler" truck had a very simple air-cooled horizontally opposed two-cylinder engine with a 5-inch (130 mm) stroke and a 5-inch (130 mm) bore, and produced around 18–20 hp (13–15 kW). Displacement was 196 cubic inches (3.2 L). [2] In 1915 a new L-head water-cooled 201 cubic inches (3.3 L) inline-four engine appeared. [3]
The BMW B38 is a 1.2 and 1.5 L (1,198 and 1,499 cc) turbocharged straight-three DOHC petrol engine, which replaced the straight-four BMW N13.Production started in 2013. It is part of a modular BMW engine family, of straight-three (B38), straight-four and straight-six alloy block and head petrol engines, [1] which use a displacement of 400 cc (24.4 cu in) per cylinder in the 1.2 and 500 cc (30. ...
The KH5T is a 1.5 L (1461 cc) DIG-T (Direct Injection Gasoline-Turbocharged) inline-3 12-valve engine, with a bore x stroke of 79.7 mm × 81.1 mm (3.14 in × 3.19 in). [clarification needed]. Power output is 160 PS (118 kW; 158 hp) and 240 N⋅m (177 lb⋅ft) of torque. The variation in compression ratio ranges between 8:1 and 14:1.
The 1H is not related to the later H engines. It was also an all-iron, OHV engine, but this was a licensed BMC (Austin) B engine.With a bore and stroke of 73 mm × 89 mm (2.87 in × 3.50 in) it displaced 1.5 L (1,489 cc), power was 50 PS (37 kW; 49 hp) at 4,400 rpm in 1956, but this increased to 57 PS (42 kW; 56 hp) in August 1958. [1]
The compression ratio was changed to 11.3:1. Engine variant for cars equipped with a manual gearbox. Single turbocharger. This engine is only available with the M66H gearbox. Emissions level Euro 6. Applications: 2016–2018 Volvo V40 II badged as V40 T3 [178] 2016–2018 Volvo V40CC badged as V40CC T3; 2016–2018 Volvo S60 II badged as S60 T3