Search results
Results from the WOW.Com Content Network
For example, 4K 60 Hz is possible using a single lane (e.g., Micro-USB / HDMI Type-A) with a DSC rate of 3.0×. [ 2 ] superMHL can use a variety of source and sink connectors with certain limitations: micro-USB or proprietary connectors can be used for the source only, HDMI Type-A for the sink only, while the USB Type-C [ 24 ] and the superMHL ...
A single Thunderbolt 3 or later port provides data transfer, support for two 4K 60 Hz displays, and quick notebook charging up to 100W with a single cable. Any Thunderbolt or USB dock can connect to a Thunderbolt 3 computer. USB devices can be connected to a Thunderbolt 3 or later port. DisplayPort and Mini DisplayPort devices are supported.
EDID structure (base block) versions range from v1.0 to v1.4; all these define upwards-compatible 128-byte structures.Version 2.0 defined a new 256-byte structure but it has been deprecated and replaced by E-EDID which supports multiple extension blocks.
The physical phenomena on which the device relies (such as spinning platters in a hard drive) will also impose limits; for instance, no spinning platter shipping in 2009 saturates SATA revision 2.0 (3 Gbit/s), so moving from this 3 Gbit/s interface to USB 3.0 at 4.8 Gbit/s for one spinning drive will result in no increase in realized transfer rate.
In VirtualLink mode, there were six high-speed lanes active in the USB-C connector and cable: four lanes transmit four DisplayPort HBR 3 video streams from the PC to the headset while two lanes implement a bidirectional USB 3.1 Gen 2 channel between the PC and the headset. Unlike the classic DisplayPort USB-C alternate mode, VirtualLink has no ...
The USB 3.1 specification takes over the existing USB 3.0's SuperSpeed USB transfer rate, now referred to as USB 3.1 Gen 1, and introduces a faster transfer rate called SuperSpeed USB 10 Gbps, corresponding to operation mode USB 3.1 Gen 2, [62] putting it on par with a single first-generation Thunderbolt channel.
Using Multi-Stream Transport (MST), a DisplayPort port can drive two 4K UHD (3840 × 2160) displays at 60 Hz, or up to four WQXGA (2560 × 1600) displays at 60 Hz with 24 bit/px RGB color. The new standard includes mandatory Dual-mode for DVI and HDMI adapters, implementing the HDMI 2.0 standard and HDCP 2.2 content protection. [ 20 ]
The DL-41xx series came out in 2013. It is a USB 3.0 to LVDS device, supporting DL3 compression and HDCP 2.0 encryption. [26] It is designed to be embedded into monitors to enable USB as a video input on displays. It is described as a low-power device, which enables it to be powered from the USB bus without the need for an external power supply.