Search results
Results from the WOW.Com Content Network
In the simplest case with three signal boxes on a stretch of line without junctions, the central of the three boxes will receive a request for a train to be accepted, the signaller will set any relevant points (turnouts) and signals and signal acceptance, and then request acceptance by the next signal box along the line.
The signal box provided a dry, climate-controlled space for the complex interlocking mechanics and also the signalman. The raised design of most signal boxes (which gave rise to the term "tower" in North America) also provided the signalman with a good view of the railway under his control. The first use of a signal box was by the London ...
A mechanical lever frame inside the signal box at Knockcroghery in Ireland Waterloo station A signalbox, LSWR (Howden, Boys' Book of Locomotives, 1907). Mechanical railway signalling installations rely on lever frames for their operation to interlock the signals, track locks [1] and points to allow the safe operation of trains in the area the signals control.
The tuned circuit often incorporates the circuit to either apply the transmitted signal to the track or recover the received signal from the other end of the section. Consider a railway with two block sections as in the diagram. Section 1 has frequency A injected at the left-hand end and received at the right-hand end.
An example is the process of signalling a train in the up direction (from A to C) past a signal box B. The signal box in rear is A and the signal box in advance is C. [2] The block indicators at B are in the Normal position. The signalman at A "offers" the train to B by sending an "Is Line Clear?"
In the UK, the beginning of the end for classic "Control" came with the commissioning of large power signal boxes from the 1950s. A power signal box (PSB) often has a number of signalmen operating multiple electric or computerized signalling panels and large illuminated track diagrams showing wide areas of operation.
Automatic block signaling (ABS), spelled automatic block signalling or called track circuit block (TCB [1]) in the UK, is a railroad communications system that consists of a series of signals that divide a railway line into a series of sections, called blocks. The system controls the movement of trains between the blocks using automatic signals.
Box B sends 4 bells to box A. (Acknowledgement, if in the position to accept the train giving permission for box A to signal the train into the block controlled by B.) (when the signalled train enters the portion of line between A and B.) Box A sends 2 bells to box B (Train entering section) as the train passes box A and enters the block ...