Search results
Results from the WOW.Com Content Network
The Linux kernel has supported USB mass-storage devices since version 2.3.47 [3] (2001, backported to kernel 2.2.18 [4]).This support includes quirks and silicon/firmware bug workarounds as well as additional functionality for devices and controllers (vendor-enabled functions such as ATA command pass-through for ATA-USB bridges, used for S.M.A.R.T. or temperature monitoring, controlling the ...
As the drive communicates via a generic mass storage protocol over USB the drive can be used as a standard optical drive on computers and operating systems that support USB optical drives. The operating system must have a UDF 2.5 driver to read data from HD DVDs. In addition a software player capable of playing HD DVD titles is required for ...
The E220 connects to the computer with a standard Mini USB cable. The device comes with two cables, one short and one long. The long one has two USB A interfaces, one used for data and power and the other optionally only for assistance power in case the computer is not able to provide the full 500 mA (milliamperes) required for the device to work from one USB interface only.
Raspberry Pi models with a newer chipset can boot from USB mass storage, such as from a flash drive. Booting from USB mass storage is not available in the original Raspberry Pi models, the Raspberry Pi Zero, the Raspberry Pi Pico, the Raspberry Pi 2 A models, and the Raspberry Pi 2 B models with versions lower than 1.2. [104]
The 12-inch Retina MacBook (early 2015) has only one expansion port, a USB-C port that supports charging, external displays, and Target Disk Mode. Using Target Disk Mode on this MacBook requires a cable that supports USB 3.0 or USB 3.1, with either a USB-A or USB-C connector on one end and a USB-C connector on the other end for the MacBook. [5]
It is also standard UMS (USB mass storage device class) compliant, i.e. no proprietary drivers are required to transfer data to and from the device's memory card. It weighs 99 g (including battery BL-5C) and the dimensions are 103 mm x 44 mm x 20 mm, 76 cc.
On a desktop computer the port is simply a connector, usually mounted on a bracket at the back accessible from outside the machine, connected to motherboard sources of SATA, USB, and power at 5 V and 12 V. No change is required to drivers, registry or BIOS settings and the USB support is independent of the SATA connection. [citation needed]