Search results
Results from the WOW.Com Content Network
Definitions. Beam – A measure of the width of the ship. There are two types: Beam, Overall (BOA), commonly referred to simply as Beam – The overall width of the ship measured at the widest point of the nominal waterline. Beam on Centerline (BOC) – Used for multihull vessels. The BOC for vessels is measured as follows: For a catamaran: the ...
The bastions projected 2 feet (0.61 m) from the wing walls, and measured, on each face, 15 feet (4.6 m) in width at the base, and 13 feet (4.0 m) at the top. The center building was surmounted by an embattled octagonal tower , which rose to the height of 77 feet (23 m) from the ground.
The most common twenty-foot container occupies a space 20 feet (6.1 m) long, 8 feet (2.44 m) wide, and 8 feet 6 inches (2.59 m) high, with an allowance externally for the corner castings; the internal volume is 1,172 cubic feet (33.2 m 3). However, both 9-foot-6-inch-tall (2.90 m) High cube and 4-foot-3-inch (1.30 m) half height containers are ...
The basic unit of length in the imperial and U.S. customary systems is the yard, defined as exactly 0.9144 m by international treaty in 1959. [2] [5] Common imperial units and U.S. customary units of length include: [6] thou or mil (1 ⁄ 1000 of an inch) inch (25.4 mm) foot (12 inches, 0.3048 m) yard (3 feet, 0.9144 m)
The most common and noted type of containers are the 20 feet and 40 feet containers. There are also containers with an extent in height called "High Cube" containers. [3] [9] The fixed exterior dimension of the standard size boxes are: [9] [10] 20 feet container size is: 20 ft (6.1 m) length by 8 ft (2.4 m) width by 8.6 ft (2.6 m) height.
At the base of the ships, a double bottom 5 feet 3 inches (1.60 m) deep supported 300 frames, each between 24 inches (61 cm) and 36 inches (91 cm) apart and measuring up to about 66 feet (20 m) long. They terminated at the bridge deck (B Deck) and were covered with steel plates which formed the outer skin of the ships.
A ship's draft/draught is the "depth of the vessel below the waterline measured vertically to the lowest part of the hull, propellers, or other reference point". [1] That is, the draft or draught is the maximum depth of any part of the vessel, including appendages such as rudders, propellers and drop keels if deployed.
The centimetre (SI symbol: cm) is a unit of length in the metric system equal to 10−2 metres ( 1 100 m = 0.01 m). To help compare different orders of magnitude, this section lists lengths between 10 −2 m and 10 −1 m (1 cm and 1 dm). 1 cm – 10 millimetres. 1 cm – 0.39 inches. 1 cm – edge of a square of area 1 cm 2.