Search results
Results from the WOW.Com Content Network
The Mist lift, Mist flow or Steam lift pump is a gas lift technique of lifting water used in a form of Ocean Thermal Energy Conversion (OTEC) where water falls to operate a hydro-electric turbine. The water is pumped from the level it drops to using rising steam which is combined into a multiphase flow. [ 1 ]
L.D. Porta gives the following equation determining the efficiency of a steam locomotive, applicable to steam engines of all kinds: power (kW) = steam Production (kg h −1)/Specific steam consumption (kg/kW h). A greater quantity of steam can be generated from a given quantity of water by superheating it.
The most characteristic element of the transfer tube pump is S-shaped "transfer tube" installed inside the feed hopper, which connects the advancing piston to the outlet. In other words, the pump cylinder which is currently pushing the material is connected to the delivery line by the transfer tube, while the retracting (pulling) cylinder is ...
The condensate pump then pumps the condensate water through a feedwater heater, which raises the temperature of the water by using extraction steam from various stages of the turbine. [5] [6] Preheating the feedwater reduces the irreversibilities involved in steam generation and therefore improves the thermodynamic efficiency of the system. [9]
For fluid power, a working fluid is a gas or liquid that primarily transfers force, motion, or mechanical energy.In hydraulics, water or hydraulic fluid transfers force between hydraulic components such as hydraulic pumps, hydraulic cylinders, and hydraulic motors that are assembled into hydraulic machinery, hydraulic drive systems, etc.
A Rankine cycle with two steam turbines and a single open feedwater heater. A feedwater heater is a power plant component used to pre-heat water delivered to a steam generating boiler. [1] [2] [3] Preheating the feedwater reduces the irreversibilities involved in steam generation and therefore improves the thermodynamic efficiency of the system ...
Heat, especially at a relatively low temperature, is low-quality energy, whereas electricity is high-quality energy. It takes around 3 kWh of heat to produce 1 kWh of electricity. But by the same token, a kilowatt-hour of this high-quality electricity can be used to pump several kilowatt-hours of heat into a building using a heat pump.
A duplex steam pump has two sets of steam and water cylinders. They are not physically connected but the steam valves on the first pump are operated by the movement of the second pump's piston rod, and vice versa. The result is that there are no "dead spots" and the pump is always self-starting. [2]