Search results
Results from the WOW.Com Content Network
Read-only memory (ROM) is a type of non-volatile memory used in computers and other electronic devices. Data stored in ROM cannot be electronically modified after the manufacture of the memory device. Read-only memory is useful for storing software that is rarely changed during the life of the system, also known as firmware.
Intelligent Systems ROM burner for the Nintendo DS. A ROM image, or ROM file, is a computer file which contains a copy of the data from a read-only memory chip, often from a video game cartridge, or used to contain a computer's firmware, or from an arcade game's main board.
ROM hacking (short for Read-only memory hacking) is the process of modifying a ROM image or ROM file to alter the contents contained within, usually of a video game to alter the game's graphics, dialogue, levels, gameplay, and/or other elements.
CD-ROM drives are rated with a speed factor relative to music CDs. If a CD-ROM is read at the same rotational speed as an audio CD, the data transfer rate is 150 Kbyte/s, commonly called "1×" (with constant linear velocity, short "CLV"). At this data rate, the track moves along under the laser spot at about 1.2 m/s.
Option ROMs normally reside on adapter cards. However, the original PC, and perhaps also the PC XT, have a spare ROM socket on the motherboard (the "system board" in IBM's terms) into which an option ROM can be inserted, and the four ROMs that contain the BASIC interpreter can also be removed and replaced with custom ROMs which can be option ROMs.
An option ROM for the PC platform (i.e. the IBM PC and derived successor computer systems) is a piece of firmware that resides in ROM on an expansion card (or stored along with the main system BIOS), which gets executed to initialize the device and (optionally) add support for the device to the BIOS.
Boot ROM is a piece of read-only memory (ROM) that is used for booting a computer system. [1] It contains instructions that are run after the CPU is reset to the reset vector , and it typically loads a bootloader .
It is one type of read-only memory (ROM). PROMs are used in digital electronic devices to store permanent data, usually low level programs such as firmware or microcode. The key difference from a standard ROM is that the data is written into a ROM during manufacture, while with a PROM the data is programmed into them after manufacture. Thus ...