Ads
related to: using plywood for exterior siding panels with a inch foam backing material
Search results
Results from the WOW.Com Content Network
Exterior insulation and finish system (EIFS) is a general class of non-load bearing building cladding systems that provides exterior walls with an insulated, water-resistant, finished surface in an integrated composite material system. EIFS has been in use since the 1960s in North America and was first used on
Insulated siding is home siding that includes rigid foam insulation, fused behind the exterior surface of the wall, for the purpose of reducing energy consumption, increasing the insulation value of the wall system and improving the stability and appearance of the siding. Currently, insulated siding is commercially available as a type of vinyl ...
EPS is the most common of the foams used and has an R-value (thermal resistance) of about 4 °F·ft 2 ·h/Btu (equivalent to about 0.7 K·m 2 /W) per 25 mm thickness, which would give the 3.5 inches (89 mm) of foam in a 4.5-inch-thick (110 mm) panel an R value of 13.8 (caution: extrapolating R-values over thickness may be imprecise due to non ...
Siding or wall cladding is the protective material attached to the exterior side of a wall of a house or other building. Along with the roof, it forms the first line of defense against the elements, most importantly sun, rain/snow, heat and cold, thus creating a stable, more comfortable environment on the interior side.
Types of External cromatic wall insulation systems (EWI Systems pictured above) An external wall insulation system (or EWIS) is a thermally insulated, protective, and decorative exterior cladding procedure involving the use of expanded polystyrene, mineral wool, polyurethane foam or phenolic foam, topped off with a reinforced cement based, mineral or synthetic finish and plaster.
This is important if space is limited, because it allows a thinner layer of insulation to be used. For example, a 1-inch layer of closed-cell foam provides about the same insulation factor as 2 inches of open-cell foam. Closed-cell foam is very strong, and structurally reinforces the insulated surface.
The core material may be polyethylene (which is combustible), a mineral-based material, or a combination of both. Panels of the same appearance may have different core materials; those with a higher proportion of mineral core withstand fire better, but can still be considered combustible. Fire will be spread by the cladding if the core is ...
It is a plywood product, with a paper face overlaid on the plywood substrate with an exterior grade (usually) phenolic adhesive. MDO is designed to have a smooth, paint-receptive surface. One or both faces can be surfaced with paper, and is produced in 4-foot-by-8-foot sheets from 3 ⁄ 8 inches to over 3 inches in thickness.
Ads
related to: using plywood for exterior siding panels with a inch foam backing material