Search results
Results from the WOW.Com Content Network
Such a dual-stack DNS server holds IPv4 addresses in the A records and IPv6 addresses in the AAAA records. Depending on the destination that is to be resolved, a DNS name server may return an IPv4 or IPv6 IP address, or both. A default address selection mechanism, or preferred protocol, needs to be configured either on hosts or the DNS server.
IPv6 addresses are assigned to organizations in much larger blocks as compared to IPv4 address assignments—the recommended allocation is a / 48 block which contains 2 80 addresses, being 2 48 or about 2.8 × 10 14 times larger than the entire IPv4 address space of 2 32 addresses and about 7.2 × 10 16 times larger than the / 8 blocks of IPv4 ...
The solicited-node multicast addresses are generated from the host's IPv6 unicast or anycast address, and each interface must have a solicited-node multicast address associated with it. A solicited-node address is created by taking the least-significant 24 bits of a unicast or anycast address and appending them to the prefix ff02::1:ff00:0 / 104 .
IPv6 multicast: [41] The low 32 bits an Ethernet address for IPv6 multicast traffic are the low 32 bits of the multicast IPv6 address used. [ 40 ] : §2.3.1 For example, IPv6 multicast traffic using the address ff02::d uses the MAC address 33-33-00-00-00-0D , and traffic to ff05::1:3 goes to the MAC address 33-33-00-01-00-03 .
The Individual Address Block (IAB) is an inactive registry which has been replaced by the MA-S (MAC address block, small), previously named OUI-36, and has no overlaps in addresses with the IAB [6] registry product as of January 1, 2014. The IAB uses an OUI from the MA-L (MAC address block, large) registry, previously called the OUI registry.
An mDNS message is a multicast UDP packet sent using the following addressing: IPv4 address 224.0.0.251 or IPv6 address ff02::fb; UDP port 5353; When using Ethernet frames, the standard IP multicast MAC address 01:00:5E:00:00:FB (for IPv4) or 33:33:00:00:00:FB (for IPv6)
To send an IPv6 packet over an IPv4 network to a 6to4 destination address, an IPv4 header with protocol type 41 is prepended to the IPv6 packet. The IPv4 destination address for the prepended packet header is derived from the IPv6 destination address of the inner packet (which is in the format of a 6to4 address), by extracting the 32 bits ...
The function of the translator is to convert IPV6 into IPV4 addresses and vice versa. TRT accomplishes this translation through IP address mapping and a custom IP address. [11] The address, for example, if packets are to be transmitted from an IPv6 address (fec0:0:0:1::/64) to an IPV4 address (10.1.1.1) would read as fec0:0:0:1::10.1.1.1.