Search results
Results from the WOW.Com Content Network
In the 1960s, steelmakers introduced bottom-blown converters and developed inert gas blowing for stirring the molten metal and removing phosphorus impurities. [3] In the Soviet Union, some experimental production of steel using the process was done in 1934, but industrial use was hampered by lack of efficient technology to produce liquid oxygen.
Liquid oxygen has a clear cyan color and is strongly paramagnetic: it can be suspended between the poles of a powerful horseshoe magnet. [2] Liquid oxygen has a density of 1.141 kg/L (1.141 g/ml), slightly denser than liquid water, and is cryogenic with a freezing point of 54.36 K (−218.79 °C; −361.82 °F) and a boiling point of 90.19 K (−182.96 °C; −297.33 °F) at 1 bar (14.5 psi).
An implosion can occur due to the use of vacuum and flaws in the glass apparatus. An explosion can occur due to the common use of liquid nitrogen in the cold trap, used to protect the vacuum pump from solvents. If a reasonable amount of air is allowed to enter the Schlenk line, liquid oxygen can
In making crucible steel, the blister steel bars were broken into pieces and melted in small crucibles, each containing 20 kg or so. This produced higher quality metal, but increased the cost. The Bessemer process reduced the time needed to make lower-grade steel to about half an hour while requiring only enough coke needed to melt the pig iron.
As an example of the latter, a "major commercial application of liquefaction is the liquefaction of air to allow separation of the constituents, such as oxygen, nitrogen, and the noble gases." [4] Another is the conversion of solid coal into a liquid form usable as a substitute for liquid fuels. [5]
In the automotive body repair industry before the 1980s, oxyacetylene gas torch welding was seldom used to weld sheet metal, since warping was a byproduct as well as excess heat. Automotive body repair methods at the time were crude and yielded improprieties until MIG welding became the industry standard. Since the 1970s, when high strength ...
The creation of sparks from metals is based on the pyrophoricity of small metal particles, and pyrophoric alloys are made for this purpose. [2] Practical applications include the sparking mechanisms in lighters and various toys, using ferrocerium; starting fires without matches, using a firesteel; the flintlock mechanism in firearms; and spark testing ferrous metals.
A vacuum insulated evaporator (VIE) is a form of pressure vessel that allows the bulk storage of cryogenic liquids including oxygen, nitrogen and argon for industrial processes and medical applications. [1] The purpose of the vacuum insulation is to prevent heat transfer between the inner shell, which holds the liquid, and surrounding ...