Search results
Results from the WOW.Com Content Network
RS-485, also known as TIA-485(-A) or EIA-485, is a standard, originally introduced in 1983, defining the electrical characteristics of drivers and receivers for use in serial communications systems. Electrical signaling is balanced , and multipoint systems are supported.
The serial DCD pin can be used to accurately detect a PPS signal, as described in RFC 2783: [1] One convenient means to provide a PPS signal to a computer system is to connect that signal to a modem-control pin on a serial-line interface to the computer. The Data Carrier Detect (DCD) pin is frequently used for this purpose.
TIA-530 originally used Category I circuits for what is commonly called "Data Set Ready" (DCE Ready, pins 6 and 22) and "Data Terminal Ready" (DTE Ready, pins 20 and 23). Revision A [2] changed these interchange circuits to Category II (para 4.3.6 and 4.3.7 of the standard [3]) and added a "Ring Indicator" on pin 22. Pin 23 is grounded in TIA ...
A male DE-9 connector on an IBM PC compatible computer (with serial port symbol) used for an RS-232 serial port A female DE-9 connector on an RS-232 cable.. A serial port is a serial communication interface through which information transfers in or out sequentially one bit at a time. [1]
The first types of small modular telephone connectors were created by AT&T in the mid-1960s for the plug-in handset and line cords of the Trimline telephone. [1] Driven by demand for multiple sets in residences with various lengths of cords, the Bell System introduced customer-connectable part kits and telephones, sold through PhoneCenter stores in the early 1970s. [2]
The Antenna Interface Standards Group (commonly referred to as AISG) is a non-profit international consortium formed by collaboration between communication infrastructure manufacturers and network operators with the purpose of maintaining and developing a standard for digital remote control and monitoring of antenna line devices in the wireless industry. [1]
The standard connector for the WTB nodes is a DIN 9 pin connector. The physical level uses RS-485 levels at 1 Mbit/s data rate. The encoding uses a Manchester II code and a HDLC frame protocol with proper voltage balancing to avoid DC components in the galvanic isolation transformers.
Data Terminal Ready (DTR) is a control signal in RS-232 serial communications, transmitted from data terminal equipment (DTE), such as a computer, to data communications equipment (DCE), for example a modem, to indicate that the terminal is ready for communications and the modem may initiate a communications channel.