Search results
Results from the WOW.Com Content Network
Plug for a sink. A plug in sanitation is an object that is used to close a drainage outlet firmly. The insertion of a plug into a drainage outlet allows the container to be filled with water or other fluids. In contrast to screw on caps, plugs are pushed into the hole and are not put over the hole.
Another device for smaller domestic doors used a loop of rope or skein fixed to the door frame, that was twisted, with a piece of wood placed in between the twists to push the door. The opening of the door twists the skein further, when the door is released the rope's torsional force pushes the arm back against the door, thereby closing it. [5] [6]
A glass stopper is often called a "ground glass joint" (or "joint taper"), and a cork stopper is called simply a "cork". Stoppers used for wine bottles are referred to as "corks", even when made from another material. [citation needed] A common every-day example of a stopper is the cork of a wine bottle.
A sink drain cover and a plastic sink plug A sink strainer used to completely replace the sink drain cover. In houses, sink strainers are often used as drain covers in sinks, showers and bathtubs. Water lines or kitchen systems can get gravel, deposits that break free, and other stray items in the line.
In the base cabinet under the sink, the drain hose from the dishwasher feeds the "top" of the air gap, and the "bottom" of the air gap is plumbed into the sink drain below the basket, or into a garbage disposal unit. When installed and maintained properly, the air gap works as described above, and prevents drain water from the sink from backing ...
Stopper may refer to: Bung, a plug used to stop the opening of a container Laboratory rubber stopper, a specific type of bung; Plug (sanitation), used to stop a drainage outlet; Defender (association football), in soccer (association football) Milkor 37/38mm and 40mm Stopper, a gun; Alternative name for a whitewater hole, in whitewater kayaking
An instrument needle valve uses a tapered pin to gradually open a space for fine control of flow. The flow can be controlled and regulated with the use of a spindle. A needle valve has a relatively small orifice with a long, tapered seat, and a needle-shaped plunger on the end of a screw, which exactly fits the seat.
In the United States, 50% of homes had disposal units as of 2009, [12] compared with only 6% in the United Kingdom [13] and 3% in Canada. [14]In Britain, Worcestershire County Council and Herefordshire Council started to subsidize the purchase of garbage disposal units in 2005, in order to reduce the amount of waste going to landfill and the carbon footprint of garbage runs. [15]