Search results
Results from the WOW.Com Content Network
The employer shall distribute portable fire extinguishers for use by employees on Class B fires so that the travel distance from the Class B hazard area to any extinguisher is 50 feet (15.2 m) or less.
NFPA recommends one 2-A fire extinguisher for every 3,000 square feet. OSHA requires employees to have access to an extinguisher within 75 feet. B: Employees should have access to a fire extinguisher within either 30 or 50 feet, depending on the hazard in question and the rating of the extinguisher (see below). C
Instead, portable fire extinguishers should be placed every 106 ft to take advantage of the coverage area per extinguisher and conforming to the shape of most rooms (see Figure 4 below). This of course assumes that there are no dividing walls that would impede the path to an extinguisher.
Larger fire extinguishers (over 40 lbs. gross weight) need to be mounted at lower heights, with their carrying handles no more than 3-1/2 feet from the floor. All hand-portable fire extinguishers need to have at least 4 inches of clearance between their bottoms and the floor.
During your monthly OSHA fire extinguisher inspection checklist, you should: Ensure the extinguisher is in its designated location; Check that the equipment is visible and accessible; Verify that the pressure gauge shows the proper pressure range; Inspect for any physical damage, corrosion or leakage; Check that the pull pin and tamper seal are ...
Dive into OSHA's detailed fire extinguisher standards. Ensure workplace safety with this comprehensive guide on placement, maintenance, and training.
manufactured homes must have a fire extinguisher. Main factors for locating a Fire Extinguisher are Accessibility and Visibility CLASS OF FIRE TYPE OF FIRE APPROVED FIRE EXTINGUISHER
The requirements of this section apply to the placement, use, maintenance, and testing of portable fire extinguishers provided for the use of employees. Paragraph (d) of this section does not apply to extinguishers provided for employee use on the outside of workplace buildings or structures.
Class C fire extinguishers are suitable for use to extinguish fires that involve appliances, tools, and other equipment that is plugged in or otherwise electrically energized, as well as for fires burning in close proximity to electrically-energized equipment.
We’ll cover each of those three issues–fire extinguisher mounting height, fire extinguisher placement, and fire extinguisher signage requirements–in this article.