Search results
Results from the WOW.Com Content Network
It was succeeded by the Motorcraft 2150 carburetor. Flow rate is determined by the diameter of the venturi, which was cast into the float chamber side as a number within a circle representing the venturi size in inches: 0.98 - 190 cfm, 1.01 - 240 cfm, 1.02 - 245 cfm, 1.08 - 287 cfm, 1.14 - 300 cfm, 1.21 - 351 cfm, 1.23 - 356 cfm, 1.33 - 424 cfm [2]
The Motorcraft 2150 is a Ford (also used by AMC) 2-barrel carburetor manufactured from 1973 through 1983, [1] based heavily on its predecessor, the Autolite 2100 carburetor. The 2150 improved on the 2100s design through the introduction of a variable air bleed system, which keeps the air to fuel mixture better balanced throughout the carburetor ...
4300A 441 CFM specs: [2] 1" primary venturi; Primary throttle bore: 1-7/16" Secondary throttle bore: 1-9/16" The 4300A was found to run too lean for the 390 CID engines, resulting in the development of the 600 CFM 4300A in 1968. [3] The 441 CFM 4300A was discontinued after the 1969 model year in favor of the two-barrel Autolite 2100 carburetor. [3]
The 1970 model year Camaro had a 250 hp (186 kW) high-performance two-barrel Rochester carburetor. In 1971, it dropped to 245 hp (183 kW), and net performance further dropped to 165 hp (123 kW) for 1972 and 145 hp (108 kW) for 1973–1976. It was basically the two-barrel version of the L48 350. It was produced until the 1976 model year.
G.fast is a digital subscriber line (DSL) protocol standard for local loops shorter than 500 meters, with performance targets between 100 Mbit/s and 1 Gbit/s, depending on loop length. [1] High speeds are only achieved over very short loops.
The engine was sold in different displacements depending on the model of car and the year and was constructed upon two distinct (possibly more) block castings. The engine block in the smaller displacement versions internally resembled the 1937-53 inline Chevrolet 216, 235 & 261" straight six (the combustion chamber design was quite different ...
Depending on the model the displacement was 2.1 L (2,127 cc) (as B21), 2.3 L (2,316 cc) (same as B23/B230 automotive) or 2.5 L (2,490 cc). The engines with 2.5 L (2,490 cc) displacement, identified as the Volvo Penta AQ151 (8 valve) and AQ171 (dohc 16 valve) models, got a forged crankshaft with a longer stroke of 86 mm (3.39 in) together with ...
With a two-barrel Hitachi carburetor and an 8.5 to 1 compression ratio this engine produced 62 PS (46 kW; 61 hp) at 6000 rpm and 8.5 kg⋅m (83 N⋅m; 61 lb⋅ft). The Datsun 1000 Coupé, introduced in Sept 1968, was equipped with an uprated A10 engine boasting a free flowing dual outlet exhaust manifold with increased compression, now 9 to 1.