Search results
Results from the WOW.Com Content Network
The first version of this engine family was a normally aspirated 2.2 L (134 cu in) unit. Developed under the leadership of Chief Engineer – Engine Design and Development Willem Weertman and head of performance tuning Charles "Pete" Hagenbuch, who had worked on most of Chrysler's V-8 engines and the Chrysler Slant-6 engine, [1] it was introduced in the 1981 Dodge Aries, Dodge Omni, Plymouth ...
The "LS" nomenclature originally came from the Regular Production Option (RPO) code LS1, assigned to the first engine in the Gen III engine series. The LS nickname has since been used to refer generally to all Gen III and IV engines, [14] but that practice can be misleading, since not all engine RPO codes in those generations begin with LS. [15]
Motorcycles with a V-twin engine mounted with its crankshaft mounted in line with the frame, e.g. the Honda CX series, are said to have "transverse" engines, [1] [2] while motorcycles with a V-twin mounted with its crankshaft mounted perpendicular to the frame, e.g. most Harley-Davidsons, are said to have "longitudinal" engines.
In 1998, a marine derivative of the UZ powerplant was produced for boating applications. The 4.0 L VT300i engine, producing 224 kW; 304 PS (300 hp) at 6000 rpm and 420 N⋅m (310 lb⋅ft) at 4200 rpm, used the same block as the UZ engine on the Lexus SC 400, GS 400, and LS 400. Applications (calendar years): 1998 Toyota Epic S21 [11]
In 1988, the 4.0 received higher flowing fuel injectors, raising output to 177 hp (132 kW; 179 PS) and 224 lb⋅ft (304 N⋅m) — more power than some configurations of the Ford 302, Chevrolet 305, and Chrysler 318 V8 engines, and more than any of the Japanese 6-cylinder truck engines, but with comparable or superior fuel economy.
Lightning LS-218: 2014–present Electric motor: N/A 200 bhp (150 kW) 216 mph (348 km/h) The 216 mph record was set using an LS-218 modified from street-legal form, with "high-speed gearing and fairing". The top speed of the stock production vehicle has not been clearly defined by an independent, verifiable source.
Since the stroke is significantly longer than the bore, the SOHC 16V (2-valve per cylinder) version of this engine is able to generate a peak torque of 350 lb·ft as low as 2501 rpm. The Willys Jeep L134 and F134 engines were undersquare, with a bore and stroke of 79.4 mm × 111.1 mm (3.13 in × 4.37 in) stroke (bore/stroke ratio = 0.714:1).
The useful power of an engine with shaft power output can be calculated using a dynamometer to measure torque and rotational speed, with maximum power reached when torque multiplied by rotational speed is a maximum. For jet engines the useful power is equal to the flight speed of the aircraft multiplied by the force, known as net thrust ...