Ads
related to: 35mm male iron to copper thread cable connector
Search results
Results from the WOW.Com Content Network
The F connector is an inexpensive, gendered, threaded, compression connector for radio frequency signals. It has good 75 Ω impedance match for frequencies well over 1 GHz [2] and has usable bandwidth up to several GHz. Connectors mate using a 3/8-32 UNEF thread. The female connector has a socket for the center conductor and external threads.
The interface dimensions for SMA connectors are listed in MIL-STD-348. [5] The SMA connector employs a 1 ⁄ 4 inch diameter, 36-thread-per-inch threaded barrel. The male is equipped with a hex nut measuring 5 ⁄ 16 inch (0.3125 inch / 7.9 mm) across opposite flats, thus taking the same wrench as a #6 SAE hex nut.
Left: A male threaded pipe, Right: a female threaded elbow. In plumbing fittings, the "M" or "F" usually comes at the beginning rather than the end of the abbreviated designation. For example: MIPT denotes male iron pipe thread; FIPT denotes female iron pipe thread. A short length of pipe having an MIP thread at both ends is sometimes called a ...
[7]: 40 By definition, each end of this "adapter" has a different connection method – e.g. the solder tabs on a male phone connector, and the male phone connector itself. [3] In this example, the solder tabs connected to the cable represent the permanent connection, whilst the male connector portion interfaces with a female socket forming a ...
A cable gland (more often known in the U.S. as a cord grip, cable strain relief, cable connector or cable fitting) is a device designed to attach and secure the end of an electrical cable to the equipment. [1] A cable gland provides strain-relief and connects by a means suitable for the type and description of cable for which it is designed ...
Passband. 0–11 GHz, often up to 18 GHz. Type N connector (female) The N connector (also, type-N connector) is a threaded, weatherproof, medium-size RF connector used to join coaxial cables. It was one of the first connectors capable of carrying microwave -frequency signals, and was invented in the 1940s by Paul Neill of Bell Labs, after whom ...
Typically 0–4 GHz. The BNC connector (initialism of "Bayonet Neill–Concelman") is a miniature quick connect/disconnect radio frequency connector used for coaxial cable. It is designed to maintain the same characteristic impedance of the cable, with 50 ohm and 75 ohm types being made. It is usually applied for video and radio frequency ...
The thread is 8mm*0.75mm pitch, and the centre pin is 1.14-1.22mm diameter, with radiused end. There is an extensive array of FME inter-series adapters available and a male cable connector is also offered for both RG-58 and RG-174 type cables to facilitate extensions, splices or transitions.
Ads
related to: 35mm male iron to copper thread cable connector