Search results
Results from the WOW.Com Content Network
A lithium polymer battery, or more correctly, lithium-ion polymer battery (abbreviated as LiPo, LIP, Li-poly, lithium-poly, and others), is a rechargeable battery of lithium-ion technology using a polymer electrolyte instead of a liquid electrolyte. Highly conductive semisolid polymers form this electrolyte.
Chemical milling or industrial etching is the subtractive manufacturing process of using baths of temperature-regulated etching chemicals to remove material to create an object with the desired shape. [1] [2] Other names for chemical etching include photo etching, chemical etching, photo chemical etching and photochemical machining. It is ...
Fat removal procedures are used mostly in cosmetic surgery with the intention of removing unwanted adipose tissue.The procedure may be invasive, as with liposuction, [1] or noninvasive using laser therapy, radiofrequency, ultrasound or cold (cryoablation or cryolipolysis) to reduce fat, sometimes in combination with injections.
Etching tanks used to perform Piranha, hydrofluoric acid or RCA clean on 4-inch wafer batches at LAAS technological facility in Toulouse, France. Etching is used in microfabrication to chemically remove layers from the surface of a wafer during manufacturing. Etching is a critically important process module in fabrication, and every wafer ...
The purpose, as with photolithography, is to create very small structures in the resist that can subsequently be transferred to the substrate material, often by etching. The primary advantage of electron-beam lithography is that it can draw custom patterns (direct-write) with sub-10 nm resolution.
Reactive-ion etching (RIE) is an etching technology used in microfabrication. RIE is a type of dry etching which has different characteristics than wet etching . RIE uses chemically reactive plasma to remove material deposited on wafers .
The end goal of this step is a clean surface where any defects present are open to the surface, dry, and free of contamination. Note that if media blasting is used, it may "work over" small discontinuities in the part, and an etching bath is recommended as a post-blasting treatment. Application of the penetrant to a part in a ventilated test ...
Plasma etching can change the surface contact angles, such as hydrophilic to hydrophobic, or vice versa. Argon plasma etching has reported to enhance contact angle from 52 deg to 68 deg, [7] and, Oxygen plasma etching to reduce contact angle from 52 deg to 19 deg for CFRP composites for bone plate applications. Plasma etching has been reported ...