Search results
Results from the WOW.Com Content Network
A Statutory Instrument, the Plugs and Sockets etc. (Safety) Regulations 1987, [16] was introduced to specifically regulate plugs and sockets in the United Kingdom. This was revised by the Plugs and Sockets etc. (Safety) Regulations 1994. [17] The guidance notes to the 1994 regulations [18] state:
BS 7671 UK wiring regulations; ... Cabling and accessories; AC power plugs and sockets; Cable tray; ... systems complying with the relevant part(s) of BS EN ISO 12696 ...
Ensure work meets the requirements of the Building Regulations / Standards and the like (where relevant) Have up-to-date copies of BS 7671; Have competence with test instruments as outlined by Part 6 ("Inspection and Testing") of BS 7671; the IET Wiring Regulations; Have public liability insurance of at least £2m.
These can be divided into three main groups: industrial sockets, which are totally different from the standard sockets; sockets with the same pinout as normal sockets but that will only seal properly when the correct plug and socket are used together (e.g., the 5 A, 13 A, and 15 A variants of Lewden sockets); and sockets that completely enclose ...
On the female socket, the major key is 4 mm deep at the 6-o'clock position. The width of the major key defines the current rating: 32 A plugs have a narrower 5 mm wide groove, while 16 A plugs have a wider 8 mm groove, and therefore 32 A plugs can be used with 16 A sockets but 16 A plugs cannot be used with 32 A sockets.
The detailed requirements of the Building Regulations in England and Wales are scheduled within 18 separate headings, each designated by a letter (Part A to Part S), and covering aspects such as workmanship, adequate materials, structure, waterproofing and weatherisation, fire safety and means of escape, sound isolation, ventilation, safe (potable) water, protection from falling, drainage ...
The CEE 7/5 socket and CEE 7/6 plug are defined in French standard NF C 61-314 "Plugs and socket-outlets for household and similar purposes" (which also includes CEE 7/7, 7/16 and 7/17 plugs) The socket has a predominantly circular recess which is 15 mm (0.591 in) deep with two symmetrical round apertures and a round 4.8 mm (0.189 in) earth pin ...
The Danish socket will also accept the CEE 7/16 Europlug or CEE 7/17 Schuko-French hybrid plug. CEE 7/4 (Schuko), CEE 7/7 (Schuko-French hybrid), and earthed CEE 7/6 French plugs will also fit into the socket but will not provide an earth connection and may be attached to appliances requiring more than the 13 A maximum rating of the socket.