Search results
Results from the WOW.Com Content Network
a Multiswitch with 16 outputs, the four cables from the Quattro-LNB enter on the left. A multiswitch is a device used with a dual or quattro LNB to distribute satellite TV signals to multiple (usually more than four) receivers from a single dish and LNB.
A QPSK Digital Satellite Headend by Fracarro. A SMATV headend is used to receive and rebroadcast satellite television channels throughout a property from a single satellite feed. [4] The system consists of a master antenna and a matching transformer to match the balanced antenna with unbalanced cable and amplifiers. [5]
Channel A video carrier is the same as Channel E2 audio carrier and thus it used to be common that the audio from a distant TV station on channel E2 received via Sporadic E interferes with Channel A video and vice versa. Channel C audio carrier's frequency falls into the FM band in Europe, and is also identical to American A6 channel audio.
The Pan-American television frequencies are different for terrestrial and cable television systems. Terrestrial television channels are divided into two bands: the VHF band which comprises channels 2 through 13 and occupies frequencies between 54 and 216 MHz, and the UHF band, which comprises channels 14 through 36 and occupies frequencies between 470 and 608 MHz.
Uplink facilities transmit the signal to the satellite over a narrow beam of microwaves, typically in the C-band frequency range due to its resistance to rain fade. [20] Uplink satellite dishes are very large, often as much as 9 to 12 metres (30 to 40 feet) in diameter [ 20 ] to achieve accurate aiming and increased signal strength at the ...
Digital Video Broadcasting - Satellite - Second Generation (DVB-S2) is a digital television broadcast standard that has been designed as a successor for the popular DVB-S system. It was developed in 2003 by the Digital Video Broadcasting Project, an international industry consortium, and ratified by ETSI (EN 302307) in March 2005.
Frequency-division multiple access (FDMA) is a channel access method used in some multiple-access protocols. FDMA allows multiple users to send data through a single communication channel, such as a coaxial cable or microwave beam, by dividing the bandwidth of the channel into separate non-overlapping frequency sub-channels and allocating each sub-channel to a separate user.
The maximum bit rate value in the sequence header of the MPEG-2 video stream is 19.4 Mbit/s for broadcast television, and 38.8 Mbit/s for the "high data rate" mode (e.g., cable television). The actual MPEG-2 video bit rate will be lower, since the MPEG-2 video stream must fit inside a transport stream.