Search results
Results from the WOW.Com Content Network
The collimator lens has the lower focal length and is placed closer to the light source, and the collector lens, which focuses the light into the triplet lens, is placed after the projection image (an active matrix LCD panel in LCD projectors). Fresnel lenses are also used as collimators in overhead projectors.
Because guided modes are trapped in the slab, they cannot be excited by light incident on the top or bottom interfaces. Light can be end-fire or butte coupled by injecting it with a lens in the plane of the slab. Alternatively a coupling element may be used to couple light into the waveguide, such as a grating coupler or prism coupler.
The OSLO software is used by scientists and engineers to design lenses, reflectors, optical instruments, laser collimators, and illumination systems. It is also used for simulation and analysis of optical systems using both geometrical and physical optics. In addition to optical design and analysis, OSLO provides a complete technical software ...
Sealed beam PAR lamp. When the lamp burns out or breaks, the whole assembly must be replaced. A PAR lamp consists of a light source, with lens and a parabolic reflector with a smooth aluminium surface determining the spread of the beam. The most common sealed beam type combines these three elements into an integral unit.
Table lamp fixtures, standard lamp fixtures, and office task light luminaires. Balanced-arm lamp is a spot light with an adjustable arm such as anglepoise, RAMUN or Luxo L1. Gooseneck (fixture) Nightlight; Floor Lamp Torch lamp or torchières are floor lamps with an upward-facing shade. They provide general lighting to the rest of the room.
This means the lens's F-number value is fixed to the overall designed focal ratio of the optical system (the diameter of the primary mirror divided into the focal length). The inability to stop down the lens results in the catadioptric lens having a short depth of field.
If a lamp has a 1 lumen bulb and the optics of the lamp are set up to focus the light evenly into a 1 steradian beam, then the beam would have a luminous intensity of 1 candela. If the optics were changed to concentrate the beam into 1/2 steradian then the source would have a luminous intensity of 2 candela.
Major accessories for the FA included the Nikon MD-15 motor drive (automatic film advance up to 3.2 frames per second, plus power for the camera electronics), the Nikon MF-16 databack (sequential numbering, time or date stamping on the film), and the Nikon Speedlight SB-15 (guide number 82/25 (feet/meters) at ASA/ISO 100) and Nikon Speedlight ...