Search results
Results from the WOW.Com Content Network
In telecommunications, ITU G.992.2 (better known as G.lite) is an ITU standard for ADSL using discrete multitone modulation. G.lite is designed to not require the use of a DSL filter . G.lite is a modulation profile which can be selected on a DSLAM port by an ADSL provider and provides greater resistance to noise and tolerates longer loop ...
CAP was the de facto standard for ADSL deployments up until 1996, deployed in 90 percent of ADSL installations at the time. However, DMT was chosen for the first ITU-T ADSL standards, G.992.1 and G.992.2 (also called G.dmt and G.lite respectively). Therefore, all modern installations of ADSL are based on the DMT modulation scheme.
ITU G.992.3 is an ITU (International Telecommunication Union) standard, also referred to as ADSL2 or G.dmt.bis.It optionally extends the capability of basic ADSL in data rates to 12 Mbit/s downstream and, depending on Annex version, up to 3.5 Mbit/s upstream (with a mandatory capability of ADSL2 transceivers of 8 Mbit/s downstream and 800 kbit/s upstream). [1]
In telecommunications, ITU-T G.992.1 (better known as G.dmt) is an ITU standard for ADSL using discrete multitone modulation (DMT). G.dmt full-rate ADSL expands the usable bandwidth of existing copper telephone lines, delivering high-speed data communications at rates up to 8 Mbit/s downstream and 1.3 Mbit/s upstream. [1]
G.992.5 (also referred to as ADSL2+, G.dmt.bis+, and G.adslplus) [1] is an ITU-T standard for asymmetric digital subscriber line (ADSL) broadband Internet access. The standard has a maximum theoretical downstream sync speed of 24 megabits per second (Mbit/s). Utilizing G.992.5 Annex M upstream sync speeds of 3.3 Mbit/s can be achieved.
Asymmetric digital subscriber line (ADSL), umbrella term for xDSL where the bitrate is greater in one direction than the other. ANSI T1.413 Issue 2, up to 8 Mbit/s and 1 Mbit/s; G.dmt, ITU-T G.992.1, up to 10 Mbit/s and 1 Mbit/s; G.lite, ITU-T G.992.2, more noise and attenuation resistant than G.dmt, up to 1,536 kbit/s and 512 kbit/s
Annex M is an optional specification in ITU-T recommendations G.992.3 (ADSL2) and G.992.5 (ADSL2+), also referred to as ADSL2 M and ADSL2+ M.This specification extends the capability of commonly deployed Annex A by more than doubling the number of upstream bits.
Annex J is a specification in ITU-T Recommendations G.992.3 and G.992.5 for all digital mode ADSL with improved spectral compatibility with ADSL over ISDN, which means that it is a type of naked DSL which will not disturb existing Annex B ADSL services in the same cable binder.