Search results
Results from the WOW.Com Content Network
The contact area depends on the geometry of the contacting bodies, the load, and the material properties. The contact area between the two parallel cylinders is a narrow rectangle. Two, non-parallel cylinders have an elliptical contact area, unless the cylinders are crossed at 90 degrees, in which case they have a circular contact area.
The American Wood Protection Association (AWPA) standards for ACQ require a retention of 0.15 lb/cu ft (2.4 kg/m 3) for above ground use and 0.40 lb/cu ft (6.4 kg/m 3) for ground contact. Chemical Specialties, Inc (CSI, now Viance) received U.S. Environmental Protection Agency 's Presidential Green Chemistry Challenge Award in 2002 for ...
The volume of the branches on the tuliptree was only 64.2% that of the trunk. [15] The President Tree (Sequoiadendron giganteum) [3] was measured in 2012 to have a trunk volume of 54,000 cubic feet (1,500 m 3) of wood and a branch volume of 9,000 cubic feet (250 m 3) of wood in the branches. In this giant tree the branch volume was only 16.7% ...
The Log Scaler measures the cut trees to determine the scale (volume) and quality (grade) of the wood to be used for manufacturing. When logs are sold, in order to determine the basis for a sale price in a standard way, the logs are "scaled" which means they are measured, identified as to species, and deductions for defects assigned to produce ...
Scratches, represented by triangular-shaped grooves, make the surface area greater. Specific surface area (SSA) is a property of solids defined as the total surface area (SA) of a material per unit mass, [1] (with units of m 2 /kg or m 2 /g). Alternatively, it may be defined as SA per solid or bulk volume [2] [3] (units of m 2 /m 3 or m −1).
Stresses in a contact area loaded simultaneously with a normal and a tangential force. Stresses were made visible using photoelasticity.. Contact mechanics is the study of the deformation of solids that touch each other at one or more points.
CLT-plate with three layers made from spruce. Cross-laminated timber (CLT) is a subcategory of engineered wood [1] panel product made from gluing together at least three layers [2] of solid-sawn lumber (i.e. lumber cut from a single log). [3]
In LVL, the direction of the wood grain is always parallel to the length of the billet. [6] The stacking of these veneers into a complete board, called a billet, creates a single piece of LVL sharing a common direction of wood grain. [1] LVL is typically rated by the manufacturer for elastic modulus and allowable bending stress.