Search results
Results from the WOW.Com Content Network
The detailed data provided by 3D systems allows for more intricate adjustments and a more thorough understanding of the vehicle's alignment geometry, particularly suited to 4 wheel drive cars or those needed 4 wheel alignment. Drive-over, Drive-on or Drive Through Wheel Alignment Systems: Next Generation Alignment
In the tire factory, the tire and wheel are mounted on a balancing machine test wheel, the assembly is rotated at 100 r/min (about 5–7 m/s (18–25 km/h; 11–16 mph) with recent high sensitivity sensors) or higher, 300 r/min (about 25–27 m/s (90–97 km/h; 56–60 mph) with typical low sensitivity sensors), and forces of unbalance are ...
Caster angles over 7 degrees with radial tires are common. Power steering is usually necessary to overcome the jacking effect from the high caster angle. Some front-end alignment calls for different right-side and left-side caster. This is called cross caster, and the difference is called the spread.
The 1960 Milliken MX1 Camber Car has a large negative camber. Camber angle is one of the angles made by the wheels of a vehicle; specifically, it is the angle between the vertical axis of a wheel and the vertical axis of the vehicle when viewed from the front or rear.
Single-sided swingarm - a suspension lying along only one side of the rear wheel, allowing it to be mounted to a hub like a car wheel. Also found on scooters , where a robust chain case doubles as the swingarm linking the engine and rear wheel, single-sided swingarms need to be much stiffer and more heavily built than double-sided, to ...
Tire bead is the term for the edge of a tire that sits on the rim. Wheels for automobiles , bicycles , etc. are made with a small slot or groove into which the tire bead sits. When the tire is properly inflated, the air pressure within the tire keeps the bead in this groove.
However, now, bigger versions of the heavy-duty tire changers are designed to mount/demount tires up to 95 inches (2.4 m) in diameter and also feature a hydraulically operated self-centering four-jaw chuck with clamping jaws that can clamp from 14 to 58 inches (0.36 to 1.47 m) either from the wheel’s inside or from the center bore.
In the presence of a non-zero slip angle, this torque tends to steer the tire toward the direction in which it is traveling, hence its name. [ 1 ] [ 2 ] The magnitude of this torque can be calculated as the product of the lateral force generated at the contact patch and the distance behind the wheel centre at which that force acts.