Search results
Results from the WOW.Com Content Network
2,300 mm (90.6 in) Height: 1,950 mm (76.8 in) ... Weight: 2,100 kg (4,629.7 lb) ... Energy converter maximum charging power of 220 kilowatts (300 hp). ...
This version uses the same head (known as "200") and block as the 2.0 litre version but a longer 76.8 mm (3.02 in) stroke crank. The bore is 80 mm (3.15 in) and it has a capacity of 2,316 cc (2.3 L). Fuel injection was K-Jetronic, the compression ratio is 9.5:1, the power output is 105 kW (143 PS; 141 hp) [14] and the redline is 6,400 rpm.
A unit of measurement, or unit of measure, is a definite magnitude of a quantity, defined and adopted by convention or by law, that is used as a standard for measurement of the same kind of quantity. [1] Any other quantity of that kind can be expressed as a multiple of the unit of measurement. [2] For example, a length is a physical quantity.
The 1977 Delta 88s and other GM B-body cars were considerably downsized from their predecessors in length and wheelbase (116 in (2,900 mm) – the same as the four-door 1973–77 A-body Cutlass Sedan) and nearly 900 lb (410 kg) lighter in weight, with curb weights dropping to between 3,500 and 3,600 lb (1,590 and 1,630 kg) depending on model. [20]
In engineering and science, dimensional analysis is the analysis of the relationships between different physical quantities by identifying their base quantities (such as length, mass, time, and electric current) and units of measurement (such as metres and grams) and tracking these dimensions as calculations or comparisons are performed.
The setat was the basic unit of land measure and may originally have varied in size across Egypt's nomes. [20] Later, it was equal to one square khet, where a khet measured 100 cubits. The setat could be divided into strips one khet long and ten cubit wide (a kha). [2] [6] [37] During the Old Kingdom:
At the front they are 390 millimetres (15.35 in) diameter and 36 mm (1.417 in) thick, clamped by gloss black six-piston fixed Brembo monoblock alloy calipers incorporating the "RS" logo, and at the rear they are 356 mm (14.02 in) diameter and 28 mm (1.102 in) with black single-piston floating calipers and an integrated electro-mechanical ...
[citation needed] The 140 mm (5.5 in) cannon was fitted to an old Leopard 2 prototype with the turret T19. [260] Counterweights were added to the rear of the turret to balance the increased weight of the 140 mm (5.5 in) cannon. The modified Leopard 2 was not equipped with any other KWS III upgrades apart from the new gun.