Search results
Results from the WOW.Com Content Network
The Rolls-Royce Trent 7000 is a high-bypass turbofan engine produced by Rolls-Royce, an iteration of the Trent family powering exclusively the Airbus A330neo. Announced on 14 July 2014, [2] it first ran on 27 November 2015. [1] It made its first flight on 19 October 2017 aboard on the A330neo. [3]
The bypass ratio (BPR) of a turbofan engine is the ratio between the mass flow rate of the bypass stream to the mass flow rate entering the core. [1] A 10:1 bypass ratio, for example, means that 10 kg of air passes through the bypass duct for every 1 kg of air passing through the core.
The Trent 900 is an axial flow, high bypass turbofan with the three coaxial shafts of the Rolls-Royce Trent family. The 2.95 m (116 in) fan with swept blades is driven by a 5-stage LP turbine, the 8-stage IP compressor and the 6-stage HP compressor are both powered by a single stage turbine, with the HP spool rotating in the opposite direction of the others.
The Rolls-Royce Trent is a family of high-bypass turbofans produced by Rolls-Royce. It continues the three spool architecture of the RB211 with a maximum thrust ranging from 61,900 to 97,000 lbf (275 to 431 kN). Launched as the RB-211-524L in June 1988, [1] the prototype first ran in August 1990. [2]
The Rolls Royce Ultrafan is the largest and most efficient engine to allow multiple turbine speeds. The turbines behind the main fan are small and allow more air to pass straight through, while a planetary gearbox "allows the main fan to spin slower and the compressors to spin faster, putting each in their optimal zones."
Rolls-Royce are currently developing the Ultrafan which employs much of what is described above. [5] [6] In the 1980s the General Electric GE36 Unducted Fan (UDF), which actually flew on a McDonnell Douglas MD-80, employed two rows of contra-rotating variable pitch fan blades, albeit without any fan casing because it was a prop-fan engine.
The Rolls-Royce Trent 700 from the 1990s, with a pressure ratio of 36:1 and 3 separate compressor rotors, needs 3 rows of variable blades and 7 bleed valves. In the beginning higher pressure ratios had to be obtained with many stages because stage pressure ratios were low, about 1.16 for the J79 compressor which needed 17 stages. [ 58 ]
The Rolls-Royce Trent XWB is a high-bypass turbofan produced by Rolls-Royce Holdings.In July 2006, the Trent XWB was selected to exclusively power the Airbus A350. [2] The first engine was run on 14 June 2010, [3] it first flew on an A380 testbed on 18 February 2012, [4] was certified in early 2013, [5] and first flew on an A350 on 14 June 2013. [6]