Search results
Results from the WOW.Com Content Network
The heating value depends on the source of gas that is used and the process that is used to liquefy the gas. The range of heating value can span ±10 to 15 percent. A typical value of the higher heating value of LNG is approximately 50 MJ/kg or 21,500 BTU/lb. [2] A typical value of the lower heating value of LNG is 45 MJ/kg or 19,350 BTU/lb.
Quantities of natural gas are measured in standard cubic meters (cubic meter of gas at temperature 15 °C (59 °F) and pressure 101.325 kPa (14.6959 psi)) or standard cubic feet (cubic foot of gas at temperature 60.0 °F and pressure 14.73 psi (101.6 kPa)), 1 standard cubic meter = 35.301 standard cubic feet.
Liquid density calculator Select a liquid from the list and calculate density as a function of temperature. Gas density calculator Calculate density of a gas for as a function of temperature and pressure. Densities of various materials. Determination of Density of Solid, instructions for performing classroom experiment.
For example, in the brewing industry, the Plato table lists sucrose concentration by weight against true SG, and was originally (20 °C/4 °C) [7] i.e. based on measurements of the density of sucrose solutions made at laboratory temperature (20 °C) but referenced to the density of water at 4 °C which is very close to the temperature at which ...
The density of butane is highly dependent on temperature and pressure in the reservoir. [19] For example, the density of liquid butane is 571.8±1 kg/m 3 (for pressures up to 2 MPa and temperature 27±0.2 °C), while the density of liquid butane is 625.5±0.7 kg/m 3 (for pressures up to 2 MPa and temperature −13±0.2 °C).
After methane, ethane is the second-largest component of natural gas. Natural gas from different gas fields varies in ethane content from less than 1% to more than 6% by volume. Prior to the 1960s, ethane and larger molecules were typically not separated from the methane component of natural gas, but simply burnt along with the methane as a fuel.
The density of propane gas at 25 °C (77 °F) is 1.808 kg/m 3, about 1.5× the density of air at the same temperature. The density of liquid propane at 25 °C (77 °F) is 0.493 g/cm 3, which is equivalent to 4.11 pounds per U.S. liquid gallon or 493 g/L. Propane expands at 1.5% per 10 °F. Thus, liquid propane has a density of approximately 4.2 ...
For gases, departure from 3 R per mole of atoms is generally due to two factors: (1) failure of the higher quantum-energy-spaced vibration modes in gas molecules to be excited at room temperature, and (2) loss of potential energy degree of freedom for small gas molecules, simply because most of their atoms are not bonded maximally in space to ...