Search results
Results from the WOW.Com Content Network
The engine used in the Ferrari F333 SP sports prototype was a modified version of the 65-degree V12 engine used in the 1990 Ferrari 641 Formula One car, enlarged from 3.5 L to 4.0 L, for longevity, durability, and reliability, and producing 641 hp (650 PS; 478 kW) @ 11,000 rpm; detuned on power and revs from the original engine by about 40 hp ...
A 1-in-47 dilution of household bleach with water (1 part bleach to 47 parts water: e.g. one teaspoon of bleach in a cup of water, or 21 ml per litre, or 1 / 3 cup of bleach in a gallon of water) is effective against many bacteria and some viruses in homes. [33]
The Ford MEL is a big-block 90° V8 engine family produced in various configurations by the Ford Motor Company between 1958 and 1967 in displacements from 383–462 cubic inches (6.3–7.6 L), and used in Ford, Edsel, Mercury, and Lincoln vehicles.
GM claims that the 1.0-liter turbo is 25 percent (3 dBA) quieter than the Ford Fiesta's 1.0-liter turbo, and the 1.4-liter is up to 50 percent (6 dBA) quieter than the VW/Audi 1.4-liter turbo. Other silencing measures include a bed-plate cylinder block that increases stiffness and a stiffened aluminum front cam cover.
It has 1.2 L (1,198 cc), 1.3 L (1,318 cc) and 1.5 litres (1,497 cc) displacement variants, which utilize the names L12A, L13A and L15A. Depending on the region, these engines are sold throughout the world in the 5-door Honda Brio Fit/Jazz hatchback Honda Civic and the 4-door Fit Aria/City sedan (also known as Fit Saloon).
The High Value engine family from General Motors is a group of cam-in-block or overhead valve V6 engines.These engines feature cast iron blocks and aluminum heads, and use the same 60° vee bank as the 60° V6 family they are based on, but the new 99 mm (3.90 in) bore required offsetting the bores by 1.5 mm (0.059 in) away from the engine center line.
The smallest-displacement engine of the 385 engine family, the 370 was introduced in 1977, replacing the 361 cu in (5.9 L) 360 Truck (FT) V8. Sharing its 3.59-inch stroke with the 429, the 370 was designed with a downsized 4.05-inch bore (shared with its predecessor and the 390 V8).
Although it had had a larger displacement than its 261-cubic-inch (4.3 L) Stovebolt predecessor it was approximately 2 inches (51 mm) shorter and 1 ⁄ 4 inch (6.4 mm) lower. [54] Flywheel bolt pattern is the same as the six and V8, with 1 ⁄ 2 inch (12.7 mm) bolts for the flywheel if produced after the 1966 model year.